Humax LGB-19DRT, LGB-22DRT Error Message, WkhUhfruglqjLv¿Qlvkhg, Channel has audio options

Troubleshooting

(12)Cannot record progammes.

-Make sure that the HDD is connected correctly.

-The hard disk is full. Delete unnecessary programmes and make space for new recording.

-Check if recording is overlapped with another channel. Stop the current recording or wait until

WKHUHFRUGLQJLV¿QLVKHG

(13)Cannot operate the TSR (Time Shifted Recording)

-Make sure that the HDD is connected correctly.

 7KH765PD\QRWEHDYDLODEOHGXULQJWKHUHFRUGLQJ:DLWXQWLOWKHUHFRUGLQJLV¿QLVKHG

-Delete unnecessary programmes and make space for new recording.

(14)Cannot playback.

-Make sure that the HDD is connected correctly.

-The signal during the recording may be weak or the hard disk too full.

(15)Cannot change channel while recording.

-Certain channels may not be changed due to restriction of the tuner type.

Error Message

Error message	Possible causes		What to do
No signal	-	The aerial is not pointing properly.	-	Adjust aerial.
	-	The AV device is not connected	-	Check the cable from the aerial. If
		properly.		you cannot resolve the problem you
				may need to have your aerial and
				installation tested by a professional.
			-	Set the AV device correctly.
			-	Check the cable from the AV device.
Will not accept	-	The key(button) is not supported
		for this product.
Invalid Mode	-	The resolution of connected PC is	-	Check the optimal resolution
		not set properly.		settings. You may need to download
				a new video driver.
No Subtitle Data	-	The channel has not the subtitle		&RQ¿UPLIWKHFKDQQHOLVSURYLGHG
		data.		the subtitle data.
The channel is scrambled	-	The channel has signal, but no		&RQ¿UPLIWKHFKDQQHOLVFXUUHQWO\
or not available.		audio or video.		on air.
	- The channel is deleted by the
		broadcasting company.
	- The channel is for data
		broadcasting. (Cannot watch the
		channel in usual way.)
The channel is scrambled.	-	This digital terrestrial receiver
		does not support the service
		that enables to descramble the
		scrambled channels.
The audio is not available.	-	The channel has a video signal,	-	Press the audio buttons on your
		but no audio is provided.		UHPRWHFRQWUROWRFRQ¿UPWKDWWKH
				channel has audio options.
CI-Module is not installed.	-	CI-Module is not installed.	-	Install proper CI-Module.
/ Invalid CI-Module	-	CI-Module is not properly inserted.	-	Pull out the CI-Module and plug it in.
	-	CI-Module is broken.	-	Replace CI-Module.

English-73