Lightwave Communications LDX-3232 manual Error Code Classifications, Response Message

REMOTE OPERATION

Error Messages

C H A P T E R 3

(up to 10 may be stored). Reading the error queue via GPIB clears the error queue.

Table 3.4 Error Code Classifications

Error Code Range	Area of Operation
E-001 to E-099	Internal Program Errors
E-100 to E-199	Parser Errors
E-200 to E-299	Execution Control Errors
E-300 to E-399	GPIB Errors
E-500 to E-599	LASER Control Errors

Table 3.5 LDX-3232 Series Error Codes

Error Code	Explanation
E-001	Memory allocation failure
E-103	<DEFINITE LENGTH ARBITRARY BLOCK PROGRAM DATA> length too long
E-104	<NON-DECIMAL NUMERIC PROGRAM DATA> type not defined
E-105	<DECIMAL PROGRAM DATA> exponent not valid
E-106	<DECIMAL PROGRAM DATA> digit expected
E-123	Command not found
E-124	<program mnemonic> Lookup, failed because query/command type match failed
E-126	Too few or too many program data elements
E-201	<PROGRAM DATA> value out of range
E-202	<PROGRAM DATA> will not convert to valid type
E-203	Security violation, command is not available without clearance
E-205	<PROGRAM DATA> is not a Boolean value or word
E-207	<PROGRAM DATA> will not convert to an unsigned 16-bit value
E-209	<PROGRAM DATA> will not convert to an unsigned 32-bit value
E-210	<PROGRAM DATA> will not convert to a floating point value
E-211	<PROGRAM DATA> will not convert to a character value
E-213	<PROGRAM DATA> is incorrect block data length
E-214	<PROGRAM DATA> length exceeds maximum

E-302

Query error; device was addressed to talk, but GPIB controller failed to read all of the

<RESPONSE MESSAGE>

04_06 LDX-3232 33