Lightwave Communications LDX-3232 manual LASerENABleOUTOFF

C H A P T E R 4

COMMAND REFERENCE

LDX-3232 Device-Dependent Command Reference

LASer:ENABle:OUTOFF	FRONT PANEL
	REMOTE

The LASer:ENABle:OUTOFF command sets the status outoff enable register of the LASER operations (things that will turn the LASER output off).

Syntax Diagram

:	LAS	:	ENAB	:	OUTOFF	<white
						space>

<nrf

value>

Parameters	An <nrf value> whose sum represents the enabled bits:
1	LASER Current Limit	256	N/A
2	LASER Voltage Limit	512	Output is out of tolerance*
4	N/A	1024	N/A
8	Power limit (with output on)	2048	N/A
16	N/A	4096	N/A
32	N/A	8192	N/A
64	N/A	16384	N/A
128	N/A	32768	N/A
Notes	The enabled LASER outoff bits can be read by using the LASer:ENABle:OUTOFF?
	query.
	The enable registers normally retain their values at power-up (as they were at power-
	down) unless the power-on status clear flag is set true (for more information see the
	*PSC definition, in the GPIB-IEEE488 specification).
	The factory default value for this register is #B0000100000001000, #H808, or 2056
	decimal.
Examples	"LAS:ENAB:OUTOFF 9" -action: enables the LASER status outoff register so that Power
	limit and LASER current limit conditions will cause the LASER output to be turned off.

"Las:Enab:Outoff #HE0B" -action: enables the LASER status outoff register so that any or all of the above conditions will cause the LASER output to be turned off.

58 LDX-3232