Lightwave Communications LDX-3232 manual LASerMODEILBW, LASerMODEMDP, Lasmodeilbw, LAS Mode MDP

C H A P T E R 4

COMMAND REFERENCE

LDX-3232 Device-Dependent Command Reference

LASer:MODE:ILBW	FRONT PANEL
	REMOTE

The LASer:MODE:ILBW command selects laser constant current mode.

						I
	:	LAS	:	MODE	:
						ILBW
Parameters	None
Notes	Constant I mode (low bandwidth) enables the output low bandpass filter.
Examples	"LAS:MODE:ILBW"	-action: sets the laser output for constant I mode (low bandwidth).
LASer:MODE:MDP						FRONT PANEL
						REMOTE
	The LASer:MODE:MDP command selects laser constant power mode.
						P
	:	LAS	:	MODE		:
						MDP
Parameters	None
Notes	This mode of laser operation requires the laser's monitor photodiode feedback to
	maintain constant optical power or constant monitor current.
	In this mode, the displayed parameter will be either IPD (if CALMD=0) in µA, or PPD (if
	CALMD>0) in mW.
Examples	"LAS:MODE:MDP"	-action: sets the laser output mode of operation to constant optical
	power mode.

72 LDX-3232