Lightwave Communications LDX-3232 manual Mode

C H A P T E R 3

REMOTE OPERATI ON

Error Messages

Error Code	Explanation
E-501	LASER interlock disabled output
E-503	LASER open circuit disabled output
E-504	LASER current limit disabled output
E-505	LASER voltage limit disabled output
E-507	LASER power limit disabled output
E-510	LASER out of tolerance disabled output
E-511	LASER control error disabled output
E-512	Analog section status is all 1’s or all 0’s (power down)
E-513	Serial EEPROM checksum error
E-515	Laser output must be off to change ranges
E-516	Incorrect configuration for calibration sequence to start
E-519	Setting a measurement is only valid during the calibration phase for that measurement;
	user has tried to calibrate a measurement without first entering the required calibration
	mode.

34 LDX-3232