Lightwave Communications LDX-3232 manual Since the last TIMER? query was issued, Timer

C H A P T E R 4

COMMAND REFERENCE

LDX-3232 Device-Dependent Command Reference

TIMER?					FRONT PANEL
					REMOTE
	The TIMER? query allows the programmer to determine how much time has passed
	since the last TIMER? query was issued.
		:	TIMER	?
	- where the response is character data that represents hours:minutes:seconds.
Notes	Each time the TIMER? query is issued, the timer is reset to 0 and the elapsed time since
	the last TIMER? query is returned.
	The timer counter is initially set at power-up, the same as the TIME? counter. So the first
	time the TIMER? is issued its response will be the same as if a TIME? query's response.
Examples	"Timer?" -response: 00:02:00.31, means the LDX-3232 has been on for two minutes and
	0.31 seconds since the last TIMER? query was issued.

"TIMER?" -response: 00:00:12.03, means the LDX-3232 has been on for 12.03 seconds since the last TIMER? query was issued.

82 LDX-3232