** | ** |
|
|
**
**
3.3 Channel Search
You can set parameters to search channels.
Select the following item using the 
button, and press the OK 
or 
button.
•Frequency: The default value is set to 362000. If you wish to set your desired frequency value, select User Define, and enter the value using the NUMERICAL (0~9) button.
•Symbol Rate: The default value is set to 6875. Select
your desired symbol rate using the 
button, and
press the OK 
or 
button. If the desired value is not listed, then select User Define, and enter the value using the NUMERICAL (0~9) button.
•Network Search: The default value is set to Enable.
Select Enable or Disable using the OK 
or 
button. When using the network search, select Enable. You can also disable the network search by selecting Disable.
•Network ID : Select your desired Network ID using the
button, and press the OK 
or 
button. If the desired value is not listed, then select User Define , and enter the value using the NUMERICAL (0~9) button.
Select Next and press the OK 
button to start channel search.
Please wait for finishing the Channel Search. If you want to stop
the operation during search, press the OK 
button.
If the Channel Search is stopped or finished, you can edit the found channels.
•Select All: Select all the found channels.
•Unselect All: Unselect all the found channels.
•Delete: Delete the selected channels.
Select Save, and press the OK 
button to save the result and go to the next step.
**
**
**
**
**
GB 19
**
**
**
**
**