Humax CXC-2000PVR user manual Error Message, Error message Possible causes What to do

** **

**

**

15.2 Error Message

**

**

Error message	Possible causes	What to do
No or bad signal	The cable is not connected.	Make sure the cable is connected
		properly.
	The cable may be damaged or	Exchange the cable.
	defective.
	The channel is not broadcasting.
The channel is	The channel has signal, but no	Confirm if the channel is currently on
scrambled or not	video.	air.
available.
	The channel is deleted by
	broadcasting company.
	The channel is for data	Cannot watch the channel in usual
	broadcasting.	way.
The audio is not	The channel has signal, but no	Press the AUDIO button to confirm if
available.	Audio.	the channel has Audio.
No access	No subscription to this channel.	Make sure you subscribe to the
		channel.
	No authorization.	If the recorder has been turned off
		for a longer time (standby or power
		off), please wait for authorization, up
		to 60 minutes.
No card inserted.	Smart card is not plugged in.	Plug in Smart Card.
Incorrect card	Wrong Smart Card is plugged in.	Plug in suitable Smart Card.
	Smart Card is not correctly plugged	Pull out the Smart Card, and plug it
	in.	in again.
	Smart Card is broken.	Replace the Smart Card.

**

**

**

GB 73

**

**

**

**

**