FUNAI LC225SL9 owner manual Optional Setting, 5Channel List, 5Manual Register, Enter

OPTIONAL SETTING

5Channel List

The channel list function lets you remove undesired channels from the channel registration list.

1Press [SETUP] to display the main menu.

5Manual Register

The manual register function lets you add the channels that were not added by the auto channel scan due to the reception condition at the initial setting.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

3 Use [Cursor K/L] to select “Channel List”, then press	3 Use [Cursor K/L] to select “Manual Register”, then
[ENTER].	press [ENTER].

Channell	Channell
Autoscan	Autoscan
Channel List	Channel List
Manual Register	Manual Register

Antenna Antenna

4Use [Cursor K/L] to select the channel you want to remove, then press [ENTER].

4Use [the Number buttons] to enter the number of the channel you want to add, then press [ENTER].

Channell Listi
Highlight channels for Ch			DTV	6		11
Up/Down key selection.				27
			DTV	8	Manuall Registeri
				9
			DTV	48	For analog channels, select a	Register
				58	channel to register using number
					keys.
			DTV	67	For digital channels, you must
					perform Autoscan function.
Ch Select		Watch/Skip	BACK
	ENTER		Back

• The channel will be removed and the display of
		Ch Change	BACK
			Back
the list lightens. You will not be able to select the
channel again using [CH K/L].
• To reactivate a removed channel, use [Cursor K/L] and
	5 Press [SETUP] to exit.
press [ENTER], so the channel will be registered and the

display of the list darkens.

•When you remove a major channel, its minor channels are removed as well.

5Press [SETUP] to exit.

Note:

•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

Note:

•If set up completes successfully, “Registered to the channel list” is displayed.

•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

•By using [CH K / L], you can select the memorized channels only.

20

EN