FUNAI DX-LCD37-09 manual Selecting the video input source, Selecting the audio mode

Using your TV

•Surround–Press or to select On or Off.

•Reset Settings–PressENTER to reset the sound settings to the factory default.

4Press MENU to close the menu.

Selecting the video input source

To select the video input source:

•Press INPUT or CH repeatedly to select the video input source. You can select:

•TV or DTV channel

•Video1—Selects the video or S-Video device connected to the VIDEO1 jacks.

•Video2–Selects the video or S-Video device connected to the VIDEO2 jacks.

•Component1—Selects the component device connected to the COMPONENT1 jacks.

•Component2—Selects the component device connected to the COMPONENT2 jacks.

•HDMI1—Selects the HDMI or DVI device connected to the HDMI1 jack.

•HDMI2—Selects the HDMI device connected to the HDMI2 jack.

•PC—Selects the computer connected to the PC-INjack.

Selecting the audio mode

To select the digital audio mode:

•Press MTS/SAP repeatedly to select the audio language. The languages you can select depend on the available languages for the program you are watching.

To select the analog audio mode:

•Press MTS/SAP repeatedly to select the audio mode. Depending on the modes available for the program you are watching, you can select STEREO, MONO, or SAP (second audio program).

Note: Pressing MTS/SAP does not control the audio from an external device.

Displaying program information

To display digital channel information:

• Press DISPLAY. The following information appears.

15

To display analog channel information:

• Press DISPLAY. The following information appears:

6

SAP / STEREO

480ii SD 4:3:3

TV-PG DLSV CC

This information includes the channel number, audio mode, type of resolution, aspect ratio, CC (if closed captioning is turned on), and program rating.

•Press DISPLAY or BACK to close the display.

To display external device information:

•Press DISPLAY. The following information appears:

Video1

480ii SD

TV-PG DLSV CC

This information includes the video input source, type of resolution, program rating, and CC (if closed captioning is turned on).

Selecting the aspect ratio

You can select from four aspect ratios for TV channels and three aspect ratios for a computer.

To select the display mode:

• Press ZOOM repeatedly to select the aspect ratio you want.

For a 4:3 video signal

Normal Zoom

1	2
A Day of Memorieies	KABC

A quarter-century ago,which may now qualify as the good old days of newspapering,run-of-paper sales accounted for 80 percent of the industry's advertising revenues.Department stores and supermarket were

8

		3
			4
		6-1
	English 1/2		5
	1080ii HD 16:9:9
	TV-PG DLSV CC
7		6

Cinema Wide

• Normal—Displays the picture at its original size. Black bars
	appears on the sides of the picture.
•	Zoom—Enlarges the center of the picture. The top and bottom
	of the picture are cropped.
•	Wide—Stretches the picture horizontally to fill the screen.

1Program title.

2Broadcast station.

3Channel number.

4Audio language.

5Effective scanning lines and scan mode, program format, and aspect ratio.

6CC is closed captioning if turned on.

7Program rating.

8Program guide information (four-line limit). If the guide information is longer than four lines,

press or to scroll the information.

If no program information is available, No description provided appears.

• Cinema—Stretches the picture to fill the 16:9 screen

horizontally, then enlarges the picture until it fills the entire

screen without changing the aspect ratio. The outer part of the

picture is cropped.

• Press DISPLAY or BACK to close the display.