Learn Commands
Learning Tips
Before transferring commands from your original remote to the RM24941, check out these useful tips on Learning.
1.Make sure you are using fresh batteries in both the RM24941 and the original remote.
2.It is recommended that a Master Clear be done before attempting any Learning. This clears all Learned commands for all device modes. (See section on Master Clear).
3.Point the top of the original remote at the base of the RM24941 so the IR LED on the original remote is in line with the RM24941 Learning sensor, located at the bottom of the remote.
4 The remotes should be positioned two to three inches apart.
5.To ensure that your units are compatible and to increase your famil- iarity with the unit, you may wish to experiment by
learning two or three keys initially. Then, carry out a Master Clear before learning all the desired functions from your original remote.
6.Incandescent or
function, keep the remotes at least three feet away from such light sources.
7.When learning a key, do not release the key on your original remote until the LED indicator light remains on, which takes
8.No commands may be learned under the LCD LEARN, SCREEN or
SETUP keys or the device keys on the rubber keypad (such as TV, VCR, DVD,
SAT/CBL, or AUDIO keys).
9.If there is a problem with the Learning process, the LED indicator light flashes for two seconds but still remains in Learning Mode.
10.All Learned keys are saved automatically.
Code Learning
Codes from the Code List include basic functionality for each device they control. Once you have programmed in the library code for your specific device, you can customize the RCU900 touchscreen to include certain functions from your original remote not embedded in the preset code.
Your RM24941 has the ability to learn and store commands from your original remotes under the mode of your choice. The RM24941 can store up to 40 key commands for each original remote. Only one original remote can be stored under any one mode (i.e., the RM24941 can learn the commands for one TV remote, one VCR remote, one DVD remote, etc.).
Once you have set your Key Label Options and have taught your RM24941 any additional commands from the original remotes, use the chart on the previous page to enter your customized options for each mode.
Note: In order for the 24941 remote to learn a function from your original remote, the original remote function must be working properly.
9