GE RM24941 instruction manual Learn Commands

Page 12

Learn Commands

Now you’re ready to have your RM24941 learn the commands from your existing remotes. All Learned keys are saved automatically. Remember, only one original remote can be stored under any one mode. The RM24941 can learn the commands for one TV remote, one VCR remote, one DVD remote, etc.

1.Point the top of the original remote at the base of the RM24941 so the IR LED on the original remote is in line with the RM24941 Learning sensor, located at the bottom of the remote. The remotes should be positioned two to three inches apart.

2.Press and hold the SETUP key on the rubber keypad until the LED indi- cator light remains on and the touchscreen shows the Main Setup Screen. This process takes approximately 2-3 seconds.

3.Release the SETUP key.

4.Press and release the LCD LEARN key. The LED indicator light blinks once to indicate acceptance of the keypress.

5.The touchscreen now shows the Device Setup Screen. Press and release the device key on the rubber keypad that corresponds to the remote you want the RM24941 to learn (TV, VCR, SAT/CBL, etc.). The LED indicator light blinks once to indicate acceptance of the keypress.

6.The touchscreen now shows the Learn Setup Screen 1, which displays the current screen keys for the mode you have chosen. The LCD SETUP and LEARN keys are also shown.

7.Press and release the key on the RM24941 to be taught. (Remember: You can switch between the screens displayed by pressing the LCD SCREEN key.) The LED indicator light blinks once to indicate acceptance of each keypress.

8.Now, press and hold the key on the original remote until the LED indicator blinks once and the touchscreen shows Learn Setup Screen 2. This process takes 2-3 seconds to complete.

9.To learn another key, press and release the LCD LEARN key and repeat from Step 7.

10.If a problem occurs with the Learning process, the LED indicator light flashes for two seconds and you hear three beeps, but the unit remains in the Learn routine with Learn Setup Screen 1 displayed. Repeat from Step 6.

11.To save and exit from the Learn routine, press and release the LCD OK key. The touchscreen returns to the Main Setup Screen.

12.The Learning process is now complete.

13.Press LCD CLEAR on the Main Setup Screen to exit Setup Mode.

Note: Learned keys will beep twice when pressed if keypress beep is turned on.

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Instruction Manual Table of Contents Battery Information LCD TouchscreenLED Indicator Light Setup Routine and ProceduresDevice Control Screens Code Entry Library Code EntryCode Search Code Autosearch Code Identification Chart Code IdentificationKey Label Options Learned Key Reference Pages Learn Commands Learning TipsCode Learning Learn Commands Clear All Stored Learned Commands Under a Mode Master ClearSleep Timer Method 2 From Setup RoutineMethod 1 From Normal Operation TV or Audio Volume Punch-Through VCR Punch-throughRecord Key Additional Features Keypress Beep FeatureLCD Touchscreen Display Time Master Reset All Power Off FeatureBacklighting Glossary of Terms CD, TAPE, TUNER, TV, VIDEO1 & VIDEO2PIP & Swap Troubleshooting ProblemDay Limited Warranty Lost Your Codes?Tabla del Contenido La Información de la Batería La Instalación de la bateríaEl Salvador de la batería Codifique a SalvadorLa Luz LED del Indicador La Rutina de arreglo y ProcedimientosEl Control del dispositivo Selecciona Codifique la Entrada La Entrada del Código de la BibliotecaLa Entrada del Código de la Biblioteca continuado Codifique la BúsquedaCodifique la Búsqueda continuado Codifique AutosearchCodifique Identificación Las Opciones claves de la Etiqueta La Referencia Clave aprendida Pagina Aprenda las Ordenes Las Puntas que aprendenEl código Aprendiendo Aprenda las Ordenes Limpie Todas Ordenes Aprendidas Almacenadas Bajo un Modo Magistral LimpiaDuerma el Reloj El método 1 De la Operación NormalEl método 2 De la Rutina de Arreglo NotasPage El Puñetazo de VCR por Registre LlaveLas Características adicionales La Característica de pip pip de KeypressEl Tiempo del Despliegue de LCD Touchscreen cont’d El maestro ReponeTodo Poder De la Característica Glosario de Términos Navigation Keys & OK KEY Problema La localización de fallasLa Garantía Limitada de 90 días ¿Perdió Sus Códigos?RM24941 Universal Touchscreen Learning Remote
Top Page Image Contents