GE RM24941 instruction manual Code Autosearch

Page 7

Code Search (continued)

Note: If your device responds and you accidentally overshoot that code by pressing the ON•OFF key again, press the CH- key or DOWN ARROW key to backtrack through the code library. You can change the direction to forward once again by pressing the ON•OFF, CH+, LCD UP ARROW, or PLAY keys.

9.Once the device to be controlled responds to the commands, press and release the LCD OK key to install the code. The touchscreen returns to the Main Setup Screen. The Code Search entry is now complete.

10.Press CLEAR on the Main Setup Screen to exit Setup Mode.

Code Autosearch

Your RM24941 has the ability to automatically scroll through the entire code library by using the Autosearch feature.

1.Manually turn on the device to be controlled (TV, VCR, DVD, etc.).

2.Press and hold the SETUP key on the rubber keypad until the LED indicator light remains on and the touchscreen shows the Main Setup Screen. This process takes approximately 2-3 seconds.

3.Release the SETUP key.

4.Press and release the LCD CODE key. The LED indicator light blinks once to indicate acceptance of the keypress.

5.The touchscreen now shows the Device Setup Screen. Press and release the device key on the rubber keypad for the device whose code you want to enter (TV, VCR, SAT/CBL, etc.). The LED indicator light blinks once to indicate acceptance of the keypress.

6.For AUX1 or AUX2, press and release the AUX device key. Select the desired device key to be programmed under AUX (TV, VCR, SAT/CBL, etc.).

7.The LCD touchscreen shows the Code Setup Screen. Press and release the LCD SEARCH key.

8.The LCD touchscreen shows the Search Setup Screen. Press the ON•OFF key on the rubber keypad just once. If you do not press any other keys, the Autosearch feature automatically starts in six seconds.

9.The Autosearch sends the next code in the list every three seconds. Note: The Autosearch can take a significant amount of time, since there are many codes in the list.

10.To speed up the Autosearch, you can manually override the process and temporarily speed it up by pressing the normal search keys (CH+, CH-, ON•OFF, PLAY, LCD UP, and LCD DOWN keys) in both forward and reverse directions.

11.If your device responds to the command, and the RM24941 sends the next code before you have a chance to press the LCD OK key, you can backtrack through the code library by pressing CH- or the DOWN ARROW. You can change the direction to forward once again by pressing the ON/OFF, CH+, LCD UP ARROW, or PLAY keys.

12.Once the device to be controlled responds to the commands, press and release the LCD OK key to install the code.

13.The touchscreen returns to the Main Setup Screen. The Code Search entry is now complete.

14.Press CLEAR on the Main Setup Screen to exit Setup Mode.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Instruction Manual Table of Contents LCD Touchscreen Battery InformationSetup Routine and Procedures LED Indicator LightDevice Control Screens Library Code Entry Code EntryCode Search Code Autosearch Code Identification Code Identification ChartKey Label Options Learned Key Reference Pages Learning Tips Learn CommandsCode Learning Learn Commands Master Clear Clear All Stored Learned Commands Under a ModeMethod 2 From Setup Routine Sleep TimerMethod 1 From Normal Operation VCR Punch-through TV or Audio Volume Punch-ThroughRecord Key Keypress Beep Feature Additional FeaturesLCD Touchscreen Display Time All Power Off Feature Master ResetBacklighting CD, TAPE, TUNER, TV, VIDEO1 & VIDEO2 Glossary of TermsPIP & Swap Problem TroubleshootingLost Your Codes? Day Limited WarrantyTabla del Contenido Codifique a Salvador La Información de la BateríaLa Instalación de la batería El Salvador de la bateríaLa Rutina de arreglo y Procedimientos La Luz LED del IndicadorEl Control del dispositivo Selecciona La Entrada del Código de la Biblioteca Codifique la EntradaCodifique la Búsqueda La Entrada del Código de la Biblioteca continuadoCodifique Autosearch Codifique la Búsqueda continuadoCodifique Identificación Las Opciones claves de la Etiqueta La Referencia Clave aprendida Pagina Las Puntas que aprenden Aprenda las OrdenesEl código Aprendiendo Aprenda las Ordenes Magistral Limpia Limpie Todas Ordenes Aprendidas Almacenadas Bajo un ModoNotas Duerma el RelojEl método 1 De la Operación Normal El método 2 De la Rutina de ArregloPage La Característica de pip pip de Keypress El Puñetazo de VCR porRegistre Llave Las Características adicionalesEl maestro Repone El Tiempo del Despliegue de LCD Touchscreen cont’dTodo Poder De la Característica Glosario de Términos Navigation Keys & OK KEY La localización de fallas Problema¿Perdió Sus Códigos? La Garantía Limitada de 90 díasRM24941 Universal Touchscreen Learning Remote
Top Page Image Contents