GE RM24941 instruction manual Code Identification Chart

Code Identification

Code Identification allows you to find out what codes are programmed in the remote under a given mode (TV, VCR, DVD, etc.).

1.Press and hold the SETUP key on the rubber keypad until the LED indicator light remains on and the touchscreen shows the Main Setup Screen. This process takes approximately 2-3 seconds.

2.Release the SETUP key.

3.Press and release the LCD CODE key. The LED indicator light blinks once to indicate acceptance of the keypress.

4.The touchscreen now shows Device Setup Screen. Press and release the device key on the rubber keypad for the device whose code you want to identify (TV, VCR, SAT/CBL, etc.). The LED indicator light blinks once to indicate acceptance of the keypress.

5.The touchscreen now shows the Code Setup Screen. Press and release the SETUP key. The LED indicator light blinks once to indicate acceptance of the keypress.

6.The touchscreen now shows the Code ID Setup Screen (initially blank except for LCD SETUP, INFO and CODE keys). The touchscreen then shows the code, using the LCD digits. The digits in the three-digit code are shown in sequence for one second each, followed by a 0.5 second gap where no digits are shown. The LED indicator light blinks once for each digit display. The sequence is completed once and then the touchscreen returns to the Main Setup Screen.

7.The Code Identification process is now complete. You can write this Code ID in the Code ID Chart for easy reference.

Code Identification Chart

Enter your codes here for easy reference:

TV CODE

VCR CODE

AUX 1 device:

AUX 2 device:

AUDIO

Tuner ❒	AMP ❒
Tape ❒

CD CODE

SAT/CBL CODE

DVD CODE

6