Operating procedure
1.Turn on the power.
Set the unit’s power switch to [ON].
Power switch
2. Proceed with the cable compensation and
Cable compensation |
3.Adjust the white balance.
This adjustment must be performed when the unit is used for the first time or when the unit has not been used for a prolonged period.
It must also be performed when the light conditions or brightness has changed.
Once the white balance has been adjusted, there is no need to adjust it again provided that the unit will be used under the same conditions.
When the white balance selector switch is used at the ATW setting, the white balance need not be adjusted.
4.Adjust the black balance.
This adjustment must be performed when the unit is used for the first time or when the unit has not been used for a prolonged period.
It must also be performed when the ambient temperature has changed significantly or at the beginning of a new season.
Once the black balance has been adjusted, there is no need to adjust it again provided that the unit is going to be used under the same conditions.
White balance adjustment
Black balance adjustment
5. Set the switches to match the shooting conditions.
14