Panasonic AW-RC600P manual Specifications

Page 22

Specifications

Power supply:

120V AC, 60 Hz

Power consumption: Approx. 67 W

indicates safety information.

Video output:

Composite signal 1.0 Vp-p/752 (BNC connector)

 

R/G/B, Y/PR/PB, Y/C signal (switch)1 each (BNC connector)

 

R,B: 0.7 Vp-p/75, G: 1.0 Vp-p/75(with SYNC)

 

Y: 1.0 Vp-p/75, PR, PB: 0.7 Vp-p/75

 

Y: 1.0 Vp-p/75, C: 0.286 Vp-p/75

 

SYNC signal (Negative polarity) 2 Vp-p/751 (BNC connector)

 

S-Video signal Y: 1.0 Vp-p/75, C: 0.286 Vp-p/75(S-Video connector)

 

The above values are the values which are cable-compensated by this unit after they has

 

been output from the camera at a regular level.

Genlock input:

1.0 Vp-p composite video signal or black burst signal/75or High impedance (automatic

 

terminated BNC connector)

AUX input:

1.0 Vp-p composite video signal/75or High impedance (automatic terminated BNC connector)

Pan/tilt head control input:

Pan/tilt head (up, down, right, left, defroster, wiper), lens (zoom, focus)

 

D-SUB 15-pin (female)

Switch function:

Gain up selection, AGC selection, color bar/camera selection, detail compensation selection,

 

auto white/auto black set, white balance selection, scene file, electronic shutter switch,

 

lens iris selection, subcarrier phase coarse adjustment, cable compensator selection, user set,

 

menu, item up, item down

Adjustment function:

R•B gain, R•B pedestal, total pedestal, lens iris adjustment, INCOM level, horizontal phase,

 

subcarrier phase finely adjustment, Y gain adjustment, chroma gain adjustment

TALLY/INCOM connector:

D-SUB 15-pin (female)

INCOM connector:

XLR 4-pin (male)

Maximum cable length:

984 ft. (300 m) (convertible camera unit)

 

328 ft. (100 m) (AW-E860 + AW-PB305 + Viewfinder)

Operating temperature:

14°F to 113°F (–10°C to +45°C)

Dimensions (WHD):

16-9/163-7/169-13/16(42088250 mm)

 

(excluding protrusions)

Weight:

Approx. 12.3 lbs. (5.6 kg)

Finish:

AV ivory paint (color resembling Munsell 7.9Y 6.8/0.8)

Weight and dimensions shown are approximate.

Specifications are subject to change without notice.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents AW-RC600P Safety precautions FCC NoteImportant Safety Instructions Accessories ContentsIntroduction  Handle the unit carefully Precautions for use Maintenance  AC 120 V is the unit’s rated supply voltageParts and their functions Front panel White balance selector switch AWC/ATW ATW/A/B  Auto white/auto black setting switch AWC/HOLD/ABC Auto setting indicator LED Auto  Red and blue gain adjustment controls Scene file switch USER/1/2/3  Red and blue pedestal adjustment controls Total pedestal adjustment control T.PED Fine adjustment of ELC Intercom volume adjustment control  Lens iris selector switch Iris MANU/AUTO Intercom connector Incom XLR 4-pin connector  Lens iris control Iris LevelAdjust Chroma  Camera cable connector Camera 26-pin connector Rear panel RGB/Y, PR and PB/YC output connectors R/PR/C, G/Y/Y, B/PB  Video output connectors VIDEO1, VIDEO2 Sync output connector Sync  S-Video output connector S-VIDEO OUT 4-pin S-connectorBNC connectors, and leave the other connectors unconnected ConnectionsAdjust the white balance Operating procedureTurn on the power Adjust the black balanceAdjustment Cable compensation Automatic adjustment AWC White balance adjustments Automatic color temperature search ATW Black balance adjustments  Automatic adjustment ABC Horizontal phase adjustment Gen-lock adjustment Hue adjustment  Setting procedure Menu item setting Menu displays Rack mounting Appearance Unit inch mmSpecifications Page Panasonic Broadcast & Television Systems Company
Top Page Image Contents