Panasonic AW-RC600P manual Black balance adjustments,  Automatic adjustment ABC

Page 17

Adjustment

Black balance adjustments

Automatic adjustment (ABC)

1.The black balance can be automatically adjusted by setting the auto white/auto black setting switch to [ABC]. While the black balance is being automatically adjusted, the auto setting indicator LED starts blinking: it goes off if the adjustment is successful and lights up if it is not successful. If the adjustment is not successful, try performing the automatic adjustment again.

(If the black balance is automatically adjusted with the lens iris selector switch at [AUTO], the lens iris will be closed automatically. Check that the lens iris is completely closed.)

2.After automatically adjusting the black balance, use the red and blue pedestal adjustment controls to finely adjust the black balance.

Note:

When the black balance is automatically adjusted again after it has been finely adjusted, it will return to the status prior to the fine adjustment regardless of the positions of the red and blue pedestal adjustment controls.

Auto setting indicator LED

Red and blue pedestal adjustment controls

Auto white/auto black setting switch

17

Image 17
Contents AW-RC600P FCC Note Safety precautionsImportant Safety Instructions Introduction ContentsAccessories  Maintenance Precautions for use Handle the unit carefully  AC 120 V is the unit’s rated supply voltageFront panel Parts and their functions Auto setting indicator LED Auto  Auto white/auto black setting switch AWC/HOLD/ABC White balance selector switch AWC/ATW ATW/A/B  Red and blue gain adjustment controls Total pedestal adjustment control T.PED  Red and blue pedestal adjustment controls Scene file switch USER/1/2/3 Fine adjustment of ELC Intercom connector Incom XLR 4-pin connector  Lens iris selector switch Iris MANU/AUTO Intercom volume adjustment control  Lens iris control Iris LevelAdjust Chroma Rear panel  Camera cable connector Camera 26-pin connector Sync output connector Sync  Video output connectors VIDEO1, VIDEO2 RGB/Y, PR and PB/YC output connectors R/PR/C, G/Y/Y, B/PB  S-Video output connector S-VIDEO OUT 4-pin S-connectorConnections BNC connectors, and leave the other connectors unconnectedTurn on the power Operating procedureAdjust the white balance Adjust the black balanceCable compensation Adjustment Automatic color temperature search ATW White balance adjustments Automatic adjustment AWC  Automatic adjustment ABC Black balance adjustments Hue adjustment Gen-lock adjustment Horizontal phase adjustment  Menu displays Menu item setting Setting procedure Rack mounting Unit inch mm AppearanceSpecifications Page Panasonic Broadcast & Television Systems Company