Setup
SETUP
Satellite Receiver and VCR
Using
S VIDEO jacks?
See page 22.
To connect a satellite receiver and VCR
1Connect the CATV cable to the single (input) jack of the splitter.
2Use a coaxial cable to connect one of the splitter’s two output jacks to the TV’s CABLE jack.
3Use a coaxial cable to connect the splitter’s other output jack to the satellite receiver’s VHF/UHF input jack.
4Connect the satellite antenna cable to the satellite receiver’s satellite input jack.
5Use a coaxial cable to connect the satellite receiver’s VHF/UHF output jack to the VCR’s VHF/UHF input jack.
6Use an A/V cable to connect the satellite receiver’s A/V output jacks to the TV’s A/V input jacks.
7Use an A/V cable to connect the VCR’s A/V output jacks to the TV’s A/V input jacks.
8Run Auto Program, as described in “Setting Up the Channel List” on page 43.
TV
Splitter (not supplied)
Coaxial cable
CATV cable
Satellite antenna cable
Coaxial cable
Satellite receiver
Cables are often
Connect red to red,
white to white, etc.
Coaxial cable
A/V cable
A/V cable
VCR
7
30