zTo go directly to programming Timer 1 or 2,
press 
instead of pressing b.
zTo return to the Timer Menu after programming one
of the Timers, press 
when the highlight is in the channel number field.
zTo return to the Timer Menu after setting the
Current Time, press 
when the highlight is in the minute field.
OptionDescription
Timer 1 and Timer 2 are not available to be set until you set the Current Time.
1 Press V or v to highlight Timer 1 or Timer 2. To set the timer, press b.
2 Press V or v to highlight one of the following options,
then press 
.
Program | Select to set the Timer by day, |
| time, duration, and channel. |
Off | Select to turn off the Timer. (Your |
| previous settings are saved.) |
3 If you selected Program in step 2, Press V and v to set the day(s), hour, minute, duration, and channel
number. Press 
or b to confirm each setting and move to the next setting. Press B to go back to the previous setting.
4 Press MENU to exit the Menu. An LED on the front panel will light, indicating the timer has been set.
Current Time |
|
| |
1 | Press | to select Current Time. | |
2 | Press V and v to set the current time (day, hour, and | ||
| minute). Press | or b to confirm each setting and | |
| move to the next setting. Press B to go back to the | ||
| previous setting. |
| |
3 Press MENU to exit the Menu.
Diagnostics | Displays the strength of the terrestrial digital broadcast |
| signal, to help you adjust your antenna to optimize signal |
| reception. |
|
|
CableCARD | This list of selectable CableCARD options will vary, |
| depending on your cable service provider. |
|
|
SETUP
SETUP
Menus
Menus
93