Sony KD-34XBR970 manual Contacting Sony, Troubleshooting, Remote Control, Channels

Page 57

Other Info

Other

SETUP

SETUP

Contacting Sony

If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (US residents only) or (416) 499-SONY (7669) (Canadian residents only), or visit http://www.sony.com/TVsupport.

Before calling Sony customer support or visiting our website, please write down the model and serial numbers of your TV. You’ll find this information on the front cover of this manual.

Troubleshooting

Remote Control

Problem

Possible Remedies

Remote control

The batteries could be weak. Replace the batteries.

does not operate

Check the orientation of the batteries.

 

Press the TV FUNCTION button. You may have inadvertently pressed the

 

SAT/CABLE FUNCTION button, which changes the remote control to SAT or

 

CABLE mode.

 

Make sure the TV’s power cord is connected securely to the wall outlet.

 

Locate the TV at least 3-4 feet away from fluorescent lights.

 

 

Cannot change channels

If you are using the TV to change channels, first press the TV FUNCTION

with the remote control

button.

 

If you are using another device to change channels, be sure to press the

 

FUNCTION button for that device. For example, if you are using your cable

 

box to change channels, be sure to press the SAT/CABLE FUNCTION button.

 

 

Remote control

If you replaced the batteries to the remote recently, the code numbers for

does not operate non-Sony

the video equipment may need to be reset.

video equipment

There may be more than one code for the equipment that you are

 

attempting to operate.

 

There is a possibility that some non-Sony equipment cannot be operated by

 

your Sony TV remote.You may need to use the equipment’s original

 

remote control.

 

 

Channels

Problem

Possible Remedies

Cannot receive upper

Use Auto Program in the Channel Settings to add receivable channels that are

channels (UHF) when

not presently in the TV’s memory (see page 40).

using an antenna

 

 

 

Cannot receive any

Use Auto Program in the Channel Settings to add receivable channels that are

channels when using

not presently in the TV’s memory (see page 40).

cable TV

 

 

 

Cannot receive or select

Use Auto Program in the Channel Settings to add receivable TV channels that

channels

are not presently in TV memory (see page 40).

 

 

50

Image 57
Contents KD-34XBR970 Owner’s Record InstallingCleaning Use Power SourcesFor the set with a polarized AC power cord plug InstallationService Damage Requiring Service Power Cord ProtectionReplacement Parts Safety CheckTrademark Information Contents Using the Features Features Package ContentsIntroducing the FD Trinitron Wega OverviewSetup TV Controls and Connectors Setting Up the TVAbout the AC Power Cord Front PanelRear Panel Cable or Antenna Only Basic Connections Connecting a Cable or AntennaFor best results, use this connection if Connecting Two RF Inputs Cable Box OnlyWith this connection you can To connect the cable boxAbout Using Connecting Optional EquipmentMaking Video Connections Example of an S Video ConnectionYour cable company does not require you to use a cable box VCR and Cable or AntennaTo connect the VCR and Cable or Antenna Press VCR/DVD FunctionVCR and Cable Box To connect a VCR and cable box, you needTo connect the VCR and cable box Function VCRSatellite Receiver To connect a satellite receiver and VCR Satellite Receiver and VCRVCR/DVD Function To connect a DVD player with component video connectors ConnectorsTo connect a DVD player with A/V connectors Audio Receiver CamcorderThrough your stereo system To connect a camcorderDevice DVI-EquippedVideo Interface output, use the following connection To connect a device that has DVI OUTTo connect a device that has Hdmi OUT HDMI-Equipped DeviceConnecting a Device with Digital Audio in Connector Using Initial Setup Setting Up the Channel ListUse the Auto Program feature as described on Use the Digital Channel feature as described onInserting Batteries Using the Remote ControlButton Descriptions Display TV/SATEnter GuideProgramming the Remote Control Laserdisc Players Manufacturer’s Codes VCRsDVD/VCR Combination Units DVD PlayersUsing Other Equipment with Your TV Remote Control All EquipmentOperating a VCR Operating a Satellite Receiver Operating a Cable Box Operating a DVD Player CH +/- or 0-9, Enter using tunerCombination Unit SelectUsing the Features This chapter describes how to use the features of your TVOverview Watching TV Guide To display the program guide Using the Program GuideUsing Screen Mode Using Screen Mode with High-Definition 720p/1080i Sources Using the Favorites Menu Using Favorites MenuUsing the Menu External Inputs Favorites SettingsNavigating Through Menu Select Favorites from the Menu control panel and press Using the MenuFavorite Channels list appears. Make your selection Press V/ v to highlight the desired channel and pressPicture Settings include the following options Using the Picture SettingsTo access the Picture Settings, follow these steps Selecting Picture OptionsAdvanced Sound Settings include the following options Using the Sound SettingsTo access the Sound Settings, follow these steps Selecting Sound OptionsAudio Out Easy control of volume adjustments Alternate AudioSpeaker Selecting Screen Mode Options Using the Screen SettingsScreen Settings include the following options To access the Screen Settings, follow these stepsChannel Settings include the following options Using the Channel SettingsTo access the Channel Settings, follow these steps Selecting Channel OptionsChannels Show/HideParental Lock Settings include the following options Using the Parental Lock SettingsTo access the Parental Lock Setting, follow these steps Selecting Parental Lock OptionsUS Models Selecting Custom Rating Options C8+ English Rating14+ 18+Selecting Setup Options Using the Setup SettingsSetup Settings include the following options To access the Setup Settings, follow these stepsProgramming Caption Vision Applications Settings include the following options Using the Applications SettingsTo access the Applications Settings, follow these steps Selecting Applications OptionsPage Glossary Other InformationRemote Control TroubleshootingContacting Sony ChannelsSound PictureAudio Out option to Variable General Optional Accessories SpecificationsDRC. See Digital Reality Creation. DVD player IndexIndex Page Sony Corporation