Other Info
Other
SETUP
SETUP
Problem | Possible Remedies |
Double images or ghosts | ❏ Using a highly directional outdoor antenna or a cable may solve the |
| problem. |
|
|
“Black box” on screen | ❏ You have selected a text option in the Setup Settings and no text is |
| available. (See page 45 to reset Setup selections.) To turn off this feature, set |
| the Caption Vision option to Off. If you were trying to select closed |
| captioning, select CC1 instead of TEXT |
|
|
Bars appear at the | ❏ Some |
top and bottom of the screen | than 16:9, such as 2.35:1. (This is especially common with theatrical |
| releases). Your TV will show these programs with bars at the top and |
| bottom of the screen. For more details, check the documentation that came |
| with your DVD (or contact your program provider). |
|
|
General
Problem | Possible Remedies |
How to reset TV to | ❏ Turn on the TV. While holding down the RESET button on the remote |
factory settings | control, press the POWER button on the TV. (The TV will turn itself off, then |
| back on again.) Release the RESET button. |
|
|
How to restore Picture | ❏ Press the RESET button on the remote control while in the Picture Settings |
settings to factory settings | (see page 35). |
How to restore Sound | ❏ Press the RESET button on the remote control while in the Sound Settings |
settings to factory settings | (see page 37). |
|
|
Cannot cycle through the | ❏ Be sure the Label Video Inputs option is not set to Skip (see page 45). |
other video equipment |
|
connected to the TV |
|
Cannot operate Menu | ❏ If a Menu option appears in gray, this indicates that the TV is in a state in |
| which the Menu option is not available. |
|
|
Lost password | ❏ In the password screen (see page 42), enter the following master password: |
| 4357. The master password clears your previous password; it cannot be |
| used to temporarily unblock channels. |
TV makes “popping” sound | ❏ This is a normal sound that results from the TV automatically degaussing |
when turned on | each time it is turned on. |
|
|
TIMER/STAND BY LED on | ❏ This LED blinks when the TV is turned on, then shuts off when the picture |
front panel is lit | is displayed. If the LED blinks for more than a minute, this may indicate |
| the TV needs service. |
Digital cable box does not | ❏ If you are connecting a VCR and digital cable box using a splitter, as |
work | described on page 9, you must use a special |
| designed to work with your digital cable box. Contact your cable TV |
| company for details. |
Cannot record digital | ❏ Only analog channels can be recorded to your VCR. |
channels to VCR |
|
|
|
52