Level 1 | Level 2 | Level 3 / Function |
Picture Adjustment |
Mode: Personal |
Contrast |
Brightness |
Colour |
Sharpness |
Hue |
Reset |
OK |
Set Up
Auto Tuning |
Programme Sorting |
Progamme Labels |
AV Preset |
Manual Programme Preset |
Detail Set Up |
OK |
Detail Set Up |
|
Auto Format: | On |
Noise Reduction: | Auto |
AV3 Output: | TV |
TV Speakers: | On |
Picture Rotation: | 0 |
PIP Input: | AV1 |
PIP Position: |
|
| OK |
AV3 OUTPUT
The “AV3 Output” option in the “Detail Set Up” menu allows you to select the source to be output from the Scart connector 
3/ S 3 so that you can record from this Scart any signal coming from the TV or from an external equipment connected to the Scart connectors
1/ | 1 or | 2/ | 2 or side connectors |
S 4 or | 4 and | 4. |
|
If you select AV1 or AV2 and you use the supplied scart cable, it is necessary to connect all 6 lines of it.
To do this: after selecting the option, press 
. Then press 
or 
to select the desired output signal: TV, AV1, AV2, AV4, YC4 or AUTO.
If you select “AUTO”, the output signal will always be the same one that is displayed on the screen.
If you have connected a decoder directly to the Scart 
3/ S 3 or to a VCR connected to this Scart, please remember to change back the “AV3 Output” to “AUTO” or “TV” for correct unscrambling. This is not necessary if you connect the decoder through the supplied scart adaptor.
EN
Picture Adjustment |
Mode: Personal |
Contrast |
Brightness |
Colour |
Sharpness |
Hue |
Reset |
OK |
Set Up |
Auto Tuning |
Programme Sorting |
Progamme Labels |
AV Preset |
Manual Programme Preset |
Detail Set Up |
OK |
Detail Set Up |
|
Auto Format: | On |
Noise Reduction: | Auto |
AV3 Output: | TV |
TV Speakers: | On |
Picture Rotation: | 0 |
PIP Input: | AV1 |
PIP Position: |
|
| OK |
TV SPEAKERS
The “TV Speakers” option in the “Detail Set Up” menu allows you to mute the TV speakers in order to listen to the TV from an external amplifier connected to the audio outputs on the rear of the TV set.
To do this: after selecting the option, press 
.
Then press or to select Off. Finally press OK to confirm and store.
To cancel this function afterwards, select “On” instead of “Off” in the step above.
Picture Adjustment |
Mode: Personal |
Contrast |
Brightness |
Colour |
Sharpness |
Hue |
Reset |
OK |
Set Up
Auto Tuning |
Programme Sorting |
Progamme Labels |
AV Preset |
Manual Programme Preset |
Detail Set Up |
OK |
Detail Set Up |
|
Auto Format: | On |
Noise Reduction: | Auto |
AV3 Output: | TV |
TV Speakers: | On |
Picture Rotation: | 0 |
PIP Input: | AV1 |
PIP Position: |
|
| OK |
PICTURE ROTATION
Because of the earth’s magnetism, the picture might slant. If this is the case, you can correct the pictures slant by using the “Picture Rotation” option in the “Detail Set Up” menu.
To do this: after selecting the option, press 
. Then press 
or 
to correct any slant of the picture between
continued...
Menu System
15