Overview of Remote Control Buttons

@º	@¡ 1	1 To Temporarily Switch Off TV:
		Press this button to temporarily switch off TV (the standby indicator on
		the TV lights up). Press again to switch on TV from standby mode.

!ª		To save energy we recommend switching off completely when TV is not in use.
!ª	2	After 15 minutes without a signal and without any button being
	2

pressed, the TV switches automatically into standby mode.

32 Selecting input source: Press this button repeatedly until the desired

!•	4	input symbol of the source appears on the TV screen.
	5	3 Selecting channels:
!¶
	6	If Media Selector is switched to TV or VCR, press this button to select
!§		channels.
!∞	7	For double-digit programme numbers, enter the second digit within 2.5
		seconds.
	8	4 a) If Media Selector is switched to TV:
!¢	9	Press this button to watch the last channel selected (the last channel
		watched for at least 5 seconds).
	!º	b) If Media Selector is switched to VCR:
!£		For Sony’s VCR double-digit programme numbers, e.g. 23, press -/- -
	!¡	first and then the buttons 2 and 3.
		5 This button only works in Teletext mode.

!™		6 Selecting screen format: Press this button repeatedly to change the
		format of the screen. For more details refer to chapter “Auto Format” on

		page 14.
		7 Selecting Teletext: Press this button to switch on teletext.
		8 a) If Media Selector is switched to TV:
		• When MENU is switched on, use these buttons to operate the menu
		system. For details refer to “Introducing and Using the Menu System”
		on page 9.
		• When MENU is switched off, press OK to show a channel overview.
		Then press	or	to select the channel and then press again the OK
		button to watch the selected channel.

b)If Media Selector is switched to VCR or DVD:

Using these buttons you can control the main functions of your VCR or

DVD.

9Recording button: If Media Selector is switched to VCR, press this button to record programmes.

!º Media Selector:

With this remote control you can operate not only this TV but also the main functions of your VCR or DVD. Switch on the device you want to operate and next press this button repeatedly to select the VCR, TV or DVD. A green light will be momentarily lit to indicate the chosen function.

Before the first time you want to control a DVD or VCR by using this remote control, you have to set it up depending on the brand of the device to be used. For more details, refer to chapter “Remote Control Configuration for VCR or DVD” on page 20.

!¡ Selecting channels: Press this button to select the next or previous broadcast channel.

!™ Muting the Sound: Press this button to mute TV sound. Press again to restore the sound.

!£ Adjusting TV volume: Press this button to adjust the volume of the TV.

!¢ Displaying the menu system: Press this button to display the menu on the TV screen. Press again to remove the menu display from the TV screen.

!∞ Selecting TV mode: Press this button to switch off PIP, teletext or video input.

!§ Selecting Sound effect: Press this button repeatedly to change the sound effect.

!¶ Selecting Picture mode: Press this button repeatedly to change the picture mode.

!• Displaying on Screen information: Press this button to display all on-screen indications. Press again to cancel.

!ª Swapping screens: Whilst you are in “PIP” mode, press this button to swap the two screens.

@º VCR or DVD on/off: Press this button to switch your VCR or DVD on or off.

@¡ PIP (Picture in Picture): Press this button to watch another source in a small picture (PIP) within the main TV picture. Press again to cancel. To select the source you want to watch, refer to the chapter “PIP Input” on page 16.

Besides TV functions, all coloured buttons as well as green symbols are also used for

Teletext operation. For more details, please refer to “Teletext” section of this instruction manual.

Overview