Level 1
Picture Adjustment |
Mode: Personal |
Contrast |
Brightness |
Colour |
Sharpness |
Hue |
Reset |
OK |
Set Up |
Auto Tuning |
Programme Sorting |
Progamme Labels |
AV Preset |
Manual Programme Preset |
Detail Set Up |
OK |
Level 2 | Level 3 / Function |
|
| AUTO FORMAT |
| |
|
| The “Auto Format” option in the “Detail Set | ||
|
| Up” menu allows you to automatically change | ||
|
| the aspect ratio of the screen. | ||
|
| To do this: after selecting the option, press . | ||
Detail Set Up | On | Then press | or | to select On (if you wish |
Auto Format: | the TV set to automatically switch the screen | |||
AV3 Output: | TV | |||
Noise Reduction: | Auto |
|
|
|
TV Speakers: | On | format according to the broadcast signal) or Off | ||
PIP Input: | AV1 | |||
Picture Rotation: | 0 | (if you wish to keep your preference). Finally | ||
PIP Position: |
| |||
| OK | press OK to store. |
|
Even if you have selected “On” or “Off” in the “Auto Format” option, you can always modify the format of the screen by pressing repeatedly on the remote control to select one of the following formats:
Smart
Smart: Imitation of wide screen effect for 4:3 broadcast.
4:3: Conventional 4:3 picture size, full picture information.
14:9: Compromise between 4:3 and 16:9 picture size.
Zoom: Widescreen format for letterbox movies.
Wide: For 16:9 broadcast. Full picture information.
In “Smart”, “Zoom” and “14:9” modes, parts of the top and bottom of the screen are cut off. Press or to adjust the position of the image on the screen (e.g. to read subtitles).
4:3
14:9
Zoom
Wide
Picture Adjustment |
Mode: Personal |
Contrast |
Brightness |
Colour |
Sharpness |
Hue |
Reset |
OK |
Set Up
Auto Tuning |
Programme Sorting |
Progamme Labels |
AV Preset |
Manual Programme Preset |
Detail Set Up |
OK |
Detail Set Up |
|
Auto Format: | On |
Noise Reduction: | Auto |
AV3 Output: | TV |
TV Speakers: | On |
Picture Rotation: | 0 |
PIP Input: | AV1 |
PIP Position: |
|
| OK |
NOISE REDUCTION
The “Noise Reduction” option in the “Detail Set Up” menu allows you to automatically reduce the picture noise visible in the broadcast signal.
To do this: after selecting the option, press . Then press or to select Auto. Finally press OK to confirm and store.
To cancel this function afterwards, select “Off” instead of “Auto” in the step above.
continued...
14
Menu System