RCA M52D Set Up Your TV/DVD, Operate Your TV/DVD, Using the DVD player, Using the Menu System

Auto Setup

Language	English
Signal Type	Cable
Automatic Search	Start

: Select : Adjust

fig.3

Set Up Your TV/DVD

Make sure you have already connected your TV/DVD to devices and a signal source, plugged in the TV/DVD, and put batteries in the remote.

Now, turn on the TV/DVD and start the setup. (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.)

Starting setup

The Starting Setup menu (fig.3) appears the first time you turn on the TV.

• Set the on-screen language

(If English is your preferred language, you can skip below and advance to the next step.)

Press ◀ or ▶ until your language is shown.

•Choose the Signal Type (Air/Cable selection) Press ▲ or ▼ to select “Signal Typel”

(If you connected Cable TV service to your ANT jack, you can skip below and advance to the next step.)

Press ◀ or ▶ to choose “Air” (this is for antenna users).

• Automatic Search

Press ▲ or ▼ to select “Automatic Search”, then press ▶ or ENTER to begin the “Automatic Search”. The search takes some time as it is looking for analog, digital and digital sub channels. Once the search is complete, the TV/DVD tunes to a channel.

– For more information, see OWNER’S MANUAL, page 15 –

– (DISPLAY)

TV/DVD

Number buttons

SETUP/	DVD
TV MENU	MENU

▲/▼/◀/▶

ENTER

PLAY

STOP

SCREEN

SIZE INPUT SELECT

Operate Your TV/DVD

Using the DVD player

To use the DVD player, press TV/DVD (“DVD” appears at the bottom of the screen). Insert a disc into the side slot load with disc’s label facing towards you. If necessary, press PLAY to play the disc. To switch back to TV mode, press TV/DVD.

The DVD player can play DVD discs, Audio CD discs, CD-R/RW discs with mp3, Windows Media-formatted content, and JPEG files.

Using the Menu System

The SETUP/TV MENU button accesses both the DVD player’s main menu and TV’s menu. To access the DVD player’s main menu, while a disc is playing first press STOP and then press SETUP/TV MENU. Use ▲ or ▼ to scroll up or down; ◀ or ▶ to scroll left or right; and ENTER to make selections.

A disc is capable of having an on-screen menu that is separate from the DVD player’s main menu. The disc menu might only contain a list of the titles and chapters, or it may allow you to change features such as language and playback settings. To access the disc menu, press DVD MENU.

Watching TV

Entering Channel Numbers

Digital channels can have both primary channels (like the analog channel number) and sub channels. If 15 is the primary channel and 1 is the sub channel the channel looks like 15-1 on screen. To tune to a such channel, press the first 3 digits, then press the – (DISPLAY) button, followed by the remaining 3 digit, as 0, 1, 5, –, 0, 0, 1, then press ENTER.

Changing Screen Formats

Your TV allows you to change the format of the picture you’ve viewing by pressing the SCREEN SIZE on the remote control. Depending on the type of signal you’re viewing, you might not be able to change the format.

Viewing Devices Connected to Your TV/DVD

To view devices connected to your TV/DVD, first make sure you are in TV mode. Press INPUT SELECT. Choose the input where you connected the device.

Your choices are TV, Video, Component, HDMI, PC or DVD (DVD mode).

Thank you for your purchase. Before making a trip back to the retailer, please visit www.rca.com/television for more information or contact us at 1-800-336-1900 so that we may assist you in operating the unit, replacing missing parts, and ensuring your satisfaction with the product.

52D0207A_QS.indd 2

6/12/09 1:47:44 PM