HP 10/100 3Com
Updating
Starting the HP PC Setup Utility
Updating LAN-specific Fields in the HP PC Setup Utility
You need to check that the BIOS is configured to use your network card’s features. To do this, use the HP PC Setup utility.
1Restart the PC.
2Press F2 when F2=Setup is displayed on the screen during startup. The opening window of the HP PC Setup utility is displayed.
Which Fields Need
Updating?
Enable
You need to check, and update if necessary, all the fields that are
If you are using Windows 95 SR2 or Windows 98 you need to ensure that the
Disable
If you are using Windows NT 4.0 you need to ensure that the
Update the LAN Settings Configure any Setup settings for the LAN interface using the following information as a guide. The names used in your version of the Setup program may be different to those shown.
If you want to boot from the network (refer to “Frequently Asked
Questions” on page 16):
•Check that Security ➜ Boot Devices Security ➜ Start from Network is enabled.
•Change the boot order so that Network appears first (Advanced ➜ Advanced CMOS Setup ➜ 1st Boot Device <Network>).
If you want to wake-up your PC from the network:
•Check that the PC can be woken from the network (Power ➜ Suspend Wakeup ➜ Network [Enabled]).
If you want to power-on your PC from the network:
•Check that the PC can be
English 9