HP 3Com 3C905B D7505A D7505A manual Software Installation and Update on a Windows NT 4.0 System

HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide

Software Installation Procedure

2Ensure that you have the correct Client and Protocols installed. You may need to contact your MIS manager for this information.

3Finally, double-click on each of your installed protocols and ensure that your settings are correct for your PC’s connection to the LAN. You may need to contact your MIS manager for this information.

Software Installation and Update on a Windows NT 4.0 System

Windows NT 4.0 Users This section describes how to install the network driver in a PC running Windows NT version 4.0 without the networking components installed.

You will need the following information from your MIS department:

•Whether you are on a LAN or are connecting to one through a modem

•The protocol used in the Microsoft Windows Network (typically TCP/IP or NetBEUI)

•The name of the Windows NT server domain or workgroup you belong to

•Your IP address if you are using TCP/IP without DHCP

Installing the Driver from the EtherDisk® diskettes

To install the network driver in a PC running Windows NT version 4.0:

1Restart the PC and start Windows NT.

2Double-click on the My Computer icon, then double-click on the Control Panel icon.

3In the Control Panel window, double-click on Network.

4When prompted to install Windows NT Networking, click on Yes. If you do not receive this prompt and the Network control panel window appears, Windows NT Networking is already installed. You will need to add the adapter manually: click on the Adapter tab, then click on Add... and follow the instructions from step 7 onwards.

5In the Network Setup Wizard window, select Wired to the Network and click on Next.

12 English