RCA l22HD34DB, L22HD34DP Film mode, Cinema Wide3 for letter box programs with subtitles

Page 23
Press INPUT SELECT, then press ▲/▼ or Number button (4) to select the PC mode.
4
Picture
Picture Setting>>
Picture Preference Sports
Picture Size>>
Film ModeOn
PC Setting>>
DNROn
: Select : Adjust
Press EXIT/CANCEL to return to the normal screen.
NOTE:
• Auto Adjust feature is available only for 16:9 or 4:3 format.
• If no buttons are pressed for more than approx. 60 seconds, the Menu-screen will return to normal Monitor-screen automatically.
• The PC settings are not effective for other input modes.
DNR
DNR (Digital Noise Reduction) can reduce the roughness of the picture.
1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.
2 Press ▲ or ▼ to select “Picture”, then press ▶ or
ENTER.
3 Press ▲ or ▼ to select “DNR”. Press ◀ or ▶ to select “On” or “Off”.
After adjusting, press ENTER to return to the PC Setting menu. Then continue to adjust the other items.
Press EXIT/CANCEL to return to the normal screen.
2
3
4
5
6
7
8

Cinema Wide3 (for letter box programs with subtitles)

To fill the width of the screen, it is extended horizontally. However; it is only slightly extended at the top and the bottom.

The top and bottom edges of the picture may be hidden.

A B C D E F G - - - - - - - - - - - - - - - -

A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -

Full (for 16:9 source programs)

Full will display the picture at the maximum size.

Native (for PC mode only)

Detects the resolution of the signal of the image and it will be shown on the screen with same amount of pixels.

NOTE:

• Some High Definition and/or Digital broadcasts may not allow you to change the picture size.

• In HDMI or COMPONENT mode with a scanning rate of 720p, 1080i or 1080p only the Cinema Wide2 and Full picture size feature is available.

• In PC Mode, only the Natural, Full and Native picture size features are available. In PC Mode (WXGA), only the Full and Native picture size features are available.

Film mode

A smoother motion may be obtained by setting the Film Mode to “On” when you view a DVD.

 

Press SETUP/TV MENU in the TV mode. The TV

1 menu screen will appear.

2

Press ▲ or ▼ to select “Picture”, then press ▶ or

ENTER.

 

 

 

3

Press ▲ or ▼ to select “Film Mode”.

Press ◀ or ▶ to select “On” or “Off”.

 

 

Picture

 

 

 

 

 

 

Picture Setting

>>

 

 

 

 

 

Picture Preference

Sports

 

 

 

 

Picture Size

>>

 

 

 

 

 

Film Mode

On

 

 

 

 

 

PC Setting

>>

 

 

 

 

 

DNR

On

 

 

 

 

 

 

 

 

4

 

 

: Select

: Adjust

 

Press EXIT/CANCEL to return to the normal screen.

Picture control adjustment in the PC mode

You can adjust to optimize the performance of the TV in the PC mode.

1

52D0201A_EN.indd 23

Press SETUP/TV MENU. The TV menu screen will appear.

Press ▲ or ▼ to select “Picture”, then press ▶ or

ENTER.

Press ▲ or ▼ to select “PC Setting”, then press ▶ or ENTER.

The PC Setting menu will appear.

PC Setting

 

Hor Position

25

 

 

 

 

Ver Position

25

 

 

 

 

Clock

0

 

 

 

 

Phase

25

 

 

 

 

Auto Adjust

>>

 

 

 

 

 

 

 

 

 

: Select

: Adjust ENTER:Set

Press ▲ or ▼ to select the desired item you want to adjust.

Press ◀ or ▶ to adjust the setting.

Hor

To adjust the horizontal position of

Position:

the image on the PC mode.

Ver

To adjust the vertical position of the

Position:

image on the PC mode.

Clock:

To minimize any vertical bars

 

or stripes visible on the screen

Phase:

background.

This must be adjusted after the

 

frequency of the PC mode has

 

been set to 60Hz to optimize

 

picture quality (page 39).

Auto Adjust: To adjust the all PC settings

automatically

23

6/12/09 1:44:34 PM

Page 22 Page 24
Image 23
Page 22 Page 24
Contents L22HD34DB L22HD34DP Product Registration Product Information Information with respect to proper grounding Electrical Code, ANSI/NFPA 70, providesTune Into Safety HOW to Handle the LCD PanelChild Safety IssueSafety Precautions How to remove the stand How to attach the standDigital Audio Jack Coaxial FeaturesContents Disc Front Location of controlsLeft side Rear sideRemote control Operation Power sourceTo USE AC Power Inserting BatteriesAntenna Jack Combiner UHF 300 ohm Antenna connectionsJack 75 ohm Coaxial Matching Cable75 ohm Cable TV Jack Cable TV Jack Splitter Switch Ohm Cable to TVCable TV connections Antenna JackEnter Setting the on-screen languageMemorizing channels Air/Cable selectionClear All Cable ChartAutomatic search Adding ChannelTo Select Digital Channels TV operationTo select the video input source To Select Analog ChannelsTo create channel labels Setting the V-ChipLabeling channels Labeling video inputsALL To register a passwordTo change the password To set the V-ChipPress or to select V-Chip Set DTV, then press or Enter To clear the all V-Chip settingsClosed Caption CC advanced Picture control adjustmentNatural Selecting the color temperatureSetting the picture size Selecting the picture sizeFull for 169 source programs Film modeNative for PC mode only Cinema Wide3 for letter box programs with subtitlesPress or to select Audio , then press or 3 Enter Sound control adjustmentSelecting the audio language SurroundSelecting the Hdmi audio input source Checking the digital- signal strengthStatus display of disc Playback procedurePower PreparationMP3/WMA/JPEG and Audio CD playback Special playbackZooming an image Limitations on displayPress Enter or Play Rotating an imageOff Setting the Jpeg intervalSelect Files You can continuously play back all Jpeg files automaticallyRepeat playback Repeat playback CDRandom playback CD ZoomingReturning to the scenes To cancel the markMarking desired scenes Marking the scenesDVD menu Setting the languageTitle selection Setting the picture mode Setting the aspect ratio of TV screenSetting on screen display Parental control Night modePassword and setting Digital outTemporary disabling of rating level by DVD disc Setting the new passwordLanguage code list To connect to a DVD player with Component Video Input Connections to other equipmentTo connect the LCD TV/DVD to a VCR To connect the LCD TV/DVD to a VCR with an S-Video cordTV/DVD Using an AV Amplifier with built-in digital surroundTo connect a Hdmi or a DVI device to the unit Monitor Display modes To return to normal mode Press Input Select againTo connect the TV/DVD to a camcorder, or a TV Game To connect the TV/DVD to a PC Personal ComputerIgnition Reception disturbancesPoor sound or no sound Problems and troubleshootingSymptoms Power Possible Solutions TV Broadcast ReceptionRemote Control Symptoms DVD Possible SolutionsTelevision SpecificationsAccessories GeneralTTE Technology, Inc. TTE Limited Warranty All LCD Models Limited Warranty Memo Memo Th Street Indianapolis, TTE Technology, Inc
Top Page Image Contents