How to attach the stand
NOTE:
•Unplug the AC cord from the AC INPUT terminal.
•Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit.
•Do not touch or press the
Place the TV on its back onto a table.
Align the stand’s
It will fit in only one direction.
Press it in direction of arrow until you hear a ‘click’.
Finally secure the
Please assure the “” mark on the stand is facing the
LCD panel side.
How to remove the stand
When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To remove the stand, remove the two (2) screws from the bottom (see A), and hold the stand on a flat surface lifting one side of the unit until stand disconnects (see B).
A B
For wall mounting, the base must be removed. To disconnect the base/stand remove the two (2) screws from the back (see page 5).
6
52D0201A_EN.indd 6
6/12/09 1:44:22 PM