RCA L22HD34DP, l22HD34DB owner manual Reception disturbances, Ignition

Page 40

Reception disturbances

Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.

IGNITION

Black spots or horizontal streaks may appear, the picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.

GHOSTS

Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception.

SNOW

If the TV is located far from the TV station, in a fringe reception area where the signal is weak, small dots may appear in the picture.

If the signal is extremely weak, the installation of a larger external antenna may be necessary.

RADIO FREQUENCY INTERFERENCE (RFI)

Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and position of the antenna or installing an RFI filter may improve the picture.

PICTURE SIZE VARIATION

A slight picture size variation is normal when you adjust the CONTRAST or

BRIGHTNESS settings.

CARE AND MAINTENANCE

To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.

The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture. Use caution when cleaning or wiping the plastic parts.

40

52D0201A_EN.indd 40

6/12/09 1:44:45 PM

Image 40

Contents L22HD34DB L22HD34DP Product Registration Product Information Electrical Code, ANSI/NFPA 70, provides Information with respect to proper groundingHOW to Handle the LCD Panel Child SafetyIssue Tune Into SafetySafety Precautions How to attach the stand How to remove the standFeatures Digital Audio Jack CoaxialContents Disc Location of controls Left sideRear side FrontRemote control Power source To USE AC PowerInserting Batteries OperationAntenna connections Jack 75 ohmCoaxial Matching Cable Antenna Jack Combiner UHF 300 ohmCable TV Jack Splitter Switch Ohm Cable to TV Cable TV connectionsAntenna Jack 75 ohm Cable TV JackSetting the on-screen language Memorizing channelsAir/Cable selection EnterCable Chart Automatic searchAdding Channel Clear AllTV operation To select the video input sourceTo Select Analog Channels To Select Digital ChannelsSetting the V-Chip Labeling channelsLabeling video inputs To create channel labelsTo register a password To change the passwordTo set the V-Chip ALLClosed Caption To clear the all V-Chip settingsPress or to select V-Chip Set DTV, then press or Enter Picture control adjustment CC advancedSelecting the color temperature Setting the picture sizeSelecting the picture size NaturalFilm mode Native for PC mode onlyCinema Wide3 for letter box programs with subtitles Full for 169 source programsSound control adjustment Selecting the audio languageSurround Press or to select Audio , then press or 3 EnterChecking the digital- signal strength Selecting the Hdmi audio input sourcePlayback procedure PowerPreparation Status display of discSpecial playback MP3/WMA/JPEG and Audio CD playbackLimitations on display Press Enter or PlayRotating an image Zooming an imageSetting the Jpeg interval Select FilesYou can continuously play back all Jpeg files automatically OffRepeat playback CD Random playback CDZooming Repeat playbackTo cancel the mark Marking desired scenesMarking the scenes Returning to the scenesTitle selection Setting the languageDVD menu Setting on screen display Setting the aspect ratio of TV screenSetting the picture mode Night mode Password and settingDigital out Parental controlSetting the new password Temporary disabling of rating level by DVD discLanguage code list Connections to other equipment To connect the LCD TV/DVD to a VCRTo connect the LCD TV/DVD to a VCR with an S-Video cord To connect to a DVD player with Component Video InputTo connect a Hdmi or a DVI device to the unit Using an AV Amplifier with built-in digital surroundTV/DVD To return to normal mode Press Input Select again To connect the TV/DVD to a camcorder, or a TV GameTo connect the TV/DVD to a PC Personal Computer Monitor Display modesReception disturbances IgnitionProblems and troubleshooting Symptoms Power Possible SolutionsTV Broadcast Reception Poor sound or no soundSymptoms DVD Possible Solutions Remote ControlSpecifications AccessoriesGeneral TelevisionTTE Technology, Inc. TTE Limited Warranty All LCD Models Limited Warranty Memo Memo TTE Technology, Inc Th Street Indianapolis,