Pioneer PRO-610HD, PRO 510HD Important Safety Instructions and Warnings, For Your Personal Safety

Page 4

The following symbols are found in this manual and on the labels on the product. They alert the operators and service personnel of this equipment to potentially dangerous conditions.

This symbol indicates an action that is prohibited.

WARNING

This symbol refers to a hazard or unsafe practice which can result in severe personal injury or death.

CAUTION

This symbol refers to a hazard or unsafe practice which can result in personal injury or property damage.

WARNING

IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS

∙Read all of these instructions.

∙Keep these instructions for later use.

∙Follow all warnings and instructions marked on the Monitor.

FOR YOUR PERSONAL SAFETY

1.This Monitor is equipped with a polarized alternating current line

plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

2.If the power cord or plug becomes

damaged or frayed, unplug this Monitor from the wall outlet and refer to qualified service personnel for servicing.

3. Do not overload wall outlets and extension cords as this can result in fire or electrical shock.

4.Do not allow anything to rest on

or roll over the power cord, and do not place the Monitor where the power cord maybe subject to traffic or abuse. This may result in electrical or fire hazard.

5.Do not attempt to service this

Monitor yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified personnel.

6.Neverpushtheobjectsofanykind

into this Monitor through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the Monitor.

7.If the Monitor has been dropped or the cabinet has been damaged, unplug this Monitor from the wall outletandrefertoqualifiedservice personnel for servicing.

8.If liquid has been spilled into the Monitor, unplug the Monitor from the wall outlet and refer servicing to qualified service personnel.

4

<ARB1527>

Page 3 Page 5
Image 4
Page 3 Page 5
Contents PRO-610HDPRO-510HD Fully Illuminated Remote Control Unit Progressive Scan/HDTV ReadyDual System Component Input for NTSC/ Progressive Dual Tuner Split screen and Search screen functionIntroduction Important NoticeImportant Safety Instructions and Warnings For Your Personal SafetyProtection and Location of Your Projection Monitor Receiver Operation of Your Projection Monitor Receiver For Servicing and ModificationContents HOW to Read this Operating Instructions Function on thisSelect TV Buttons operated ARB1527Installing the Monitor Installation PrecautionsOperating Precautions Care of Your Projection MonitorHOW to Attach the Provided Protective Screen PartsincludedforprotectivescreeninstallationPanel Frames Mounts Side Frame Covers Trims Panel frame Protective screenUpper frame cover Panel frame Side view ScrewsFrame cover Lower frame cover Before you watch the TV, perform the following procedure Before USEInserting batteries into the remote control unit Remote control operation rangeBattery replacement Basic OperationsConnecting the Antenna Connecting VHF/UHF antennaConnecting VHF/UHF antenna with VCR Connecting the Catv converterConnecting the Catv converter with VCR Connecting VHF/UHF antenna and Catv converterVHF antenna UHF antenna Mixer Cable TV Catv converterDVD/LD player Video movie, etc SAT tuner Digital tunerSignal Rear panelInput jacks Monitor Output jacksVideo Input jacks Component Video Input jackVIDEO/VIDEO RGB Front Panel Functions Return button Volume buttonsInput 4 jacks Remote Control Unit Functions VOL volume +, buttons SPLIT/SEARCH screen buttonsDisplay button = CH Enter buttonTurn on the Main Power switch To Watch TVBest Horizontal and Vertical Viewing Angle Select by pressing the number button ExampleAuto power off function BasicOperations Cable Catv Channel Assignment TableSound adjustment menu See Picture adjustment menu SeeChecking the Menu Screen setting menu See SET UP menu See pages 28, 30, 33, 36, 43, 59, 62Auto Channel Preset Select TVThe5orbuttonandthenpressingSET ENTER. Refer toAfter setting, press Menu to turn the menu off Select Auto Preset Start∙ Auto Channel Preset starts Convergence Adjustment Select screen modeWhen the cross pattern is white The5orbuttonandthenpressingSETMove the red line onto the green line Rating No ONE 17 and Under AdmittedNot Rated TV-Y TV-Y7Setting the Program Blocking Level Select Program Block in the sameSet Block to on GuidelinesBasic Functions Removing Blocking MULTI-SCREEN ModeBlock 5or buttonandthenpressingSET Changing PasswordCut along dotted line and file after reading Enter new password Setting Screen Mode Press the Screen Mode buttonChanging Screen Size Natural Wide Cinema Wide Normal Full ZoomTo Adjust the Screen Position Adjust the screen positionAfter adjusting, press Menu to turn the menu off ∙ Adjustable range Cinema Wide modeMaking Notes on Program Content Freeze screen MULTI-SCREEN FunctionPress the Split button Press the Freeze buttonPress the Search button FunctionsSearch screen Select Mode Set CC to onChanging Channel SET UP To ADD or Delete Preset ChannelsChannel Preset Select Channel ADD/DELSelect Setting , then select ADD addition or DEL deletion Select Channel ,thenselectachannelSelect Label and input the label characters Other channelsSelect Favorite Channel Favorite Channel SET UPTo set Select antenna Select numberSelect the channel Picture Adjustments Recall the Desired SettingsSelect the input source and show the image on the screen Storing the SET Picture Quality in MemoryPress Menu and select Picture To Adjust the Picture Quality Select the adjustment itemAdjust by pressing 2or Refer toTo adjust 3D Y/C Level Press Menu and select Picture . Refer to Select OtherSelect 3D Y/C Level Select the desired levelTo adjust 3D NR Level To adjust Color TemperatureSelect 3D NR Level Select Color TempTo adjust Purecinema To adjust Flesh ToneSelect Flesh Tone Select the desired Purecinema mode To adjust Scan Velocity ModulationSelect SVM Sound Adjustments Select the desired audio modeWatching Stereo and Bilingual Programs ENTER. Refer to Select MTS in the same wayTo Adjust the Sound Quality Select the adjustment itemAdjust by pressing 2or BASS, Treble and Balance can be adjustedTo Select the Desired Surround Mode Select the desired Surround modeAfter setting, press Menu to turn Select SurroundTo Adjust Super Bass Use this function to enjoy powerful bass soundsSelect Super Bass Set Super Bass to onDPO Function Select DPO in the same waySet DPO to on Menu offSelect the adjust point Adjust the red lineConvergence adjustment may be fined-tuned from here Select ADJ MULTI-POINTAdjust the blue line Audio Signal Connection with ReceiverCATVconverter ReceiverVarious Functions Select the Speaker modeSelect Speaker Select the Audio OUT mode Select Audio OUTSignal Input CatvPress Menu and select SET UP Select System ModeSwitch the System Mode Unless required, set the System Mode to OFFConnecting the System Remote To other units bearing the ë markRemote Code SET UP At the same time, press the Edit button and number buttonSelect the desired manufacturer ∙ Example To select DVD/LDManufacturers preset remote control signals To Learn Remote Control Signals Example To learn the VCR power to turn onBefore operation LED will remain litSET/ENTER, TV/SAT/DVD TV/SAT/DVD MENU, DTV/DVD TOPMenu VCRRemote Control Unit Setting Buttons Using the TV Remote Control Unit to Control Other DevicesReceiver Control Buttons DTV Control Buttons Source Power button Turns the power of the cable converter on and offCable Control Buttons CH channel +, buttonsSAT Control Buttons SAT Menu buttonSAT Guide button SAT Info buttonVCR Control Buttons 7STOP buttonVCR REC record button ÁFF buttonDVD/LD Control Buttons Set the mode switch to TV/DTV and then press the DTV button Initial settingTo Watch DTV Connect the digital tunerOthers You have completed the initial settingsDigital tuner SH-D09 Channel scan has finished Select a channel Digital broadcast channelsExample Channel There are four methods for this∙ Press the button between the main and sub channels Recording DTV Programs DTV OutputsMenu off Signals will then be output from On pages 78 toENTER. Refer to Select DTV OUT in the same way RecordingConnect the VHF/UHF signal to the digital tuner Connection with ReceiverSet the System Mode to ON. Refer to ∙ Switching the monitor to DTV mode makes it possible to∙ Each time the DTV button is pressed, the operating mode Will switch between DTV and TV mode. To change the inputSET UP menu See Menu IndexMain menu See Closed Caption menu SeeChannel SET UP menu See Change Password menu SeeAuto Channel Preset menu See Convergence menu See pages 30Troubleshooting Symptom CAUSE/REMEDY PagesSymptom Cause Specifications Others 0 4 2 1 1 4 0 99I00SF0W00
Related manuals
Manual 83 pages 976 b

PRO 510HD, PRO-610HD specifications

The Pioneer PRO-510HD and PRO-610HD are two advanced professional display monitors that exemplify cutting-edge technology in the realm of high-definition visual solutions. Designed for various applications, including broadcasting, live events, and video production, these monitors provide exceptional image quality and versatile features.

One of the standout characteristics of both models is their high-resolution display capabilities. The PRO-510HD boasts a 51-inch screen size with an impressive resolution of 1920 x 1080 pixels, ensuring sharp and vibrant images that meet the demands of professional users. The larger PRO-610HD features a 61-inch screen size with the same high-definition resolution, allowing for an immersive viewing experience.

These monitors leverage advanced LCD technology to deliver remarkable color accuracy and consistent brightness. With a wide color gamut, users can expect true-to-life colors, making these monitors ideal for color-critical applications. The brightness levels of both models reach up to 700 cd/m², ensuring visibility even in brightly lit environments.

Connectivity is a crucial aspect of any professional monitor, and the PRO-510HD and PRO-610HD are equipped with a range of input options. They offer multiple HD-SDI, HDMI, DVI, and analog connections, allowing for seamless integration with various broadcasting and production equipment. This flexibility ensures that users can easily connect their devices without the need for additional converters or adapters.

Another significant feature of these monitors is the built-in waveform and vector scope displays. These tools are essential for ensuring proper exposure and color balance, providing users with real-time monitoring of their video signals. The monitors also support various aspect ratios, making it easy to adjust the display according to specific project requirements.

Durability is key for professional equipment, and both the PRO-510HD and PRO-610HD are constructed with robust materials, ensuring longevity even in demanding environments. The monitors are designed for continuous operation, making them reliable for long hours of use whether in studios or on location.

In conclusion, the Pioneer PRO-510HD and PRO-610HD are powerful tools for professionals who require high-quality displays with advanced features. Their excellent image quality, extensive connectivity options, and integrated monitoring tools make them an attractive choice for anyone involved in video production or broadcasting. With their durable design and user-friendly operation, these monitors stand out as reliable partners in the visual media landscape.
Top Page Image Contents