Pioneer PRO 510HD, PRO-610HD manual Symptom Cause

Page 89

TROUBLESHOOTING

The following symptoms may be mistakenly regarded as malfunctioning.

In many cases, they are not the faults of the Monitor.

SYMPTOM

CAUSE

When there are 2 or 3 layers of images

Influence of waves from the broadcast stations reflected by nearby mountains and

(ghost phenomenon)

high-rise buildings.

 

 

Spots appears on the screen

Influence of harmful waves produced by motor equipments such as hair dryers

Noises are audible

and vacuum cleaners, ignition devices such as cars and motorbikes, flashing devices

 

such as thermostats and electricity discharge by transmission/distribution lines.

 

 

Stripes appears on the screen

Mixing of electric waves from TV stations FM stations, amateur wireless, public

Noises are audible

wireless (simple wireless), etc., or nearby personal computer, TV, VCR, audio

 

equipment.

 

 

When a crack sound is heard some time

Sometimes, creaking sounds will be produced when cabinets expand or contract

after the power is turned on

due to changes in the surrounding temperature. Do not suspect a fault.

 

 

The power goes off momentarily, after a

The power was turned off momentarily due to the protection circuit to correct the

sudden pop sound

electric discharge phenomenon in the CRT. Do not suspect fault.

 

 

OTHERS

89

<ARB1527>

Page 88 Page 90
Image 89
Page 88 Page 90
Contents PRO-610HDPRO-510HD Progressive Scan/HDTV Ready Fully Illuminated Remote Control UnitDual System Component Input for NTSC/ Progressive Dual Tuner Split screen and Search screen functionImportant Notice IntroductionFor Your Personal Safety Important Safety Instructions and WarningsProtection and Location of Your Projection Monitor Receiver For Servicing and Modification Operation of Your Projection Monitor ReceiverContents Function on this HOW to Read this Operating InstructionsSelect TV Buttons operated ARB1527Installation Precautions Installing the MonitorOperating Precautions Care of Your Projection MonitorPartsincludedforprotectivescreeninstallation HOW to Attach the Provided Protective ScreenPanel Frames Mounts Side Frame Covers Trims Panel frame Protective screenFrame cover Lower frame cover Panel frame Side view ScrewsUpper frame cover Before USE Before you watch the TV, perform the following procedureRemote control operation range Inserting batteries into the remote control unitBattery replacement Basic OperationsConnecting VHF/UHF antenna Connecting the AntennaConnecting VHF/UHF antenna with VCR Connecting the Catv converterConnecting VHF/UHF antenna and Catv converter Connecting the Catv converter with VCRVHF antenna UHF antenna Mixer Cable TV Catv converterVideo movie, etc SAT tuner Digital tuner DVD/LD playerRear panel SignalMonitor Output jacks Input jacksVideo Input jacks Component Video Input jackVIDEO/VIDEO RGB Front Panel Functions Input 4 jacks Volume buttonsReturn button Remote Control Unit Functions SPLIT/SEARCH screen buttons VOL volume +, buttonsDisplay button = CH Enter buttonTo Watch TV Turn on the Main Power switchBest Horizontal and Vertical Viewing Angle Select by pressing the number button ExampleBasic Auto power off functionOperations Cable Catv Channel Assignment TableChecking the Menu Picture adjustment menu SeeSound adjustment menu See SET UP menu See pages 28, 30, 33, 36, 43, 59, 62 Screen setting menu SeeSelect TV Auto Channel PresetThe5orbuttonandthenpressingSET ENTER. Refer to∙ Auto Channel Preset starts Select Auto Preset StartAfter setting, press Menu to turn the menu off Select screen mode Convergence AdjustmentWhen the cross pattern is white The5orbuttonandthenpressingSETMove the red line onto the green line No ONE 17 and Under Admitted RatingNot Rated TV-Y TV-Y7Select Program Block in the same Setting the Program Blocking LevelGuidelines Set Block to onBlock Removing Blocking MULTI-SCREEN ModeBasic Functions Cut along dotted line and file after reading Changing Password5or buttonandthenpressingSET Enter new password Press the Screen Mode button Setting Screen ModeChanging Screen Size Natural Wide Cinema Wide Normal Full ZoomAdjust the screen position To Adjust the Screen PositionAfter adjusting, press Menu to turn the menu off ∙ Adjustable range Cinema Wide modeMULTI-SCREEN Function Making Notes on Program Content Freeze screenPress the Split button Press the Freeze buttonSearch screen FunctionsPress the Search button Set CC to on Select ModeTo ADD or Delete Preset Channels Changing Channel SET UPChannel Preset Select Channel ADD/DELSelect Channel ,thenselectachannel Select Setting , then select ADD addition or DEL deletionOther channels Select Label and input the label charactersTo set Favorite Channel SET UPSelect Favorite Channel Select the channel Select numberSelect antenna Recall the Desired Settings Picture AdjustmentsPress Menu and select Picture Storing the SET Picture Quality in MemorySelect the input source and show the image on the screen Select the adjustment item To Adjust the Picture QualityAdjust by pressing 2or Refer toPress Menu and select Picture . Refer to Select Other To adjust 3D Y/C LevelSelect 3D Y/C Level Select the desired levelTo adjust Color Temperature To adjust 3D NR LevelSelect 3D NR Level Select Color TempSelect Flesh Tone To adjust Flesh ToneTo adjust Purecinema Select SVM To adjust Scan Velocity ModulationSelect the desired Purecinema mode Select the desired audio mode Sound AdjustmentsWatching Stereo and Bilingual Programs ENTER. Refer to Select MTS in the same waySelect the adjustment item To Adjust the Sound QualityAdjust by pressing 2or BASS, Treble and Balance can be adjustedSelect the desired Surround mode To Select the Desired Surround ModeAfter setting, press Menu to turn Select SurroundUse this function to enjoy powerful bass sounds To Adjust Super BassSelect Super Bass Set Super Bass to onSelect DPO in the same way DPO FunctionSet DPO to on Menu offAdjust the red line Select the adjust pointConvergence adjustment may be fined-tuned from here Select ADJ MULTI-POINTAdjust the blue line Connection with Receiver Audio SignalCATVconverter ReceiverSelect Speaker Select the Speaker modeVarious Functions Select Audio OUT Select the Audio OUT modeCatv Signal InputSelect System Mode Press Menu and select SET UPSwitch the System Mode Unless required, set the System Mode to OFFTo other units bearing the ë mark Connecting the System RemoteAt the same time, press the Edit button and number button Remote Code SET UPSelect the desired manufacturer ∙ Example To select DVD/LDManufacturers preset remote control signals Example To learn the VCR power to turn on To Learn Remote Control SignalsBefore operation LED will remain litTV/SAT/DVD MENU, DTV/DVD TOP SET/ENTER, TV/SAT/DVDMenu VCRReceiver Control Buttons Using the TV Remote Control Unit to Control Other DevicesRemote Control Unit Setting Buttons DTV Control Buttons Turns the power of the cable converter on and off Source Power buttonCable Control Buttons CH channel +, buttonsSAT Menu button SAT Control ButtonsSAT Guide button SAT Info button7STOP button VCR Control ButtonsVCR REC record button ÁFF buttonDVD/LD Control Buttons Initial setting Set the mode switch to TV/DTV and then press the DTV buttonTo Watch DTV Connect the digital tunerDigital tuner SH-D09 Channel scan has finished You have completed the initial settingsOthers Digital broadcast channels Select a channel∙ Press the button between the main and sub channels There are four methods for thisExample Channel DTV Outputs Recording DTV ProgramsOn pages 78 to Menu off Signals will then be output fromENTER. Refer to Select DTV OUT in the same way RecordingConnection with Receiver Connect the VHF/UHF signal to the digital tuner∙ Switching the monitor to DTV mode makes it possible to Set the System Mode to ON. Refer to∙ Each time the DTV button is pressed, the operating mode Will switch between DTV and TV mode. To change the inputMenu Index SET UP menu SeeMain menu See Closed Caption menu SeeChange Password menu See Channel SET UP menu SeeAuto Channel Preset menu See Convergence menu See pages 30Symptom CAUSE/REMEDY Pages TroubleshootingSymptom Cause Specifications Others 99I00SF0W00 0 4 2 1 1 4 0
Related manuals
Manual 83 pages 976 b

PRO 510HD, PRO-610HD specifications

The Pioneer PRO-510HD and PRO-610HD are two advanced professional display monitors that exemplify cutting-edge technology in the realm of high-definition visual solutions. Designed for various applications, including broadcasting, live events, and video production, these monitors provide exceptional image quality and versatile features.

One of the standout characteristics of both models is their high-resolution display capabilities. The PRO-510HD boasts a 51-inch screen size with an impressive resolution of 1920 x 1080 pixels, ensuring sharp and vibrant images that meet the demands of professional users. The larger PRO-610HD features a 61-inch screen size with the same high-definition resolution, allowing for an immersive viewing experience.

These monitors leverage advanced LCD technology to deliver remarkable color accuracy and consistent brightness. With a wide color gamut, users can expect true-to-life colors, making these monitors ideal for color-critical applications. The brightness levels of both models reach up to 700 cd/m², ensuring visibility even in brightly lit environments.

Connectivity is a crucial aspect of any professional monitor, and the PRO-510HD and PRO-610HD are equipped with a range of input options. They offer multiple HD-SDI, HDMI, DVI, and analog connections, allowing for seamless integration with various broadcasting and production equipment. This flexibility ensures that users can easily connect their devices without the need for additional converters or adapters.

Another significant feature of these monitors is the built-in waveform and vector scope displays. These tools are essential for ensuring proper exposure and color balance, providing users with real-time monitoring of their video signals. The monitors also support various aspect ratios, making it easy to adjust the display according to specific project requirements.

Durability is key for professional equipment, and both the PRO-510HD and PRO-610HD are constructed with robust materials, ensuring longevity even in demanding environments. The monitors are designed for continuous operation, making them reliable for long hours of use whether in studios or on location.

In conclusion, the Pioneer PRO-510HD and PRO-610HD are powerful tools for professionals who require high-quality displays with advanced features. Their excellent image quality, extensive connectivity options, and integrated monitoring tools make them an attractive choice for anyone involved in video production or broadcasting. With their durable design and user-friendly operation, these monitors stand out as reliable partners in the visual media landscape.
Top Page Image Contents