RCA NCJ11 owner manual Clearing Sleep Timer, Setting Sleep Timer with or without remote

By setting the Sleep Timer, you can program your TV to turn itself

Setting Sleep Timer (with or without remote)

off after a certain period of time (up to four hours).

This is useful whenever you want to watch TV for an hour or so

before going to sleep.

1.Repeatedly press MENU to select SETUP MENU, and then press + or - to display setup functions. Press MENU to select SLEEP TIMER.

4.The sleep timer will begin to count down to zero. The word "SLEEP" will appear on the screen whenever you change channels or press the remote's TV or DISPLAY button to

let you know the sleep timer is activated.

2.Press the + or-- buttonto se-lectt-he

length of time (up to four hours) you want the TV to stay on.

Each time you press the + or - button, the time will increase 30 minutes (up to 4 hours). Then the time display will start over.

The amount of time remaining before the TV shuts itself off will

appear in the sleep timer menu

whenever you display the SLEEP TIMER function.

1 hour

and

23 minutes

remaining

3.When finished, the display will

automatically disappear from the screen in a few seconds. To make it

disappear more quickly, press the CLEAR button.

-Clearing Sleep Timer

To cancel the sleep timer, enter the

SLEEP TIMER function and then press the ÷ or - button until the screen shows

0:00.

5.When the sleep timer counts down to 0:00, the sleep timer display will appear on the screen for a few seconds. Then the TV will turn itself off.

If you want the TV to stay on when

this display appears, press the + button on the remote to add more

time to the SLEEP TIMER display.

20