RCA NCJ11 owner manual ProgrammingRemote To Control Other Brands of VCRs, Operating Notes

The digital remote control that came

-ProgrammingRemote To Control Other Brands of VCRs

packed with your TV controls your TV and up to two compatible VCRs, including most other brands.

To program the remote, just press

VCR1 (or VCR2), then ID, then the two- digit code number for your brand of VCR.

Note About Controlling Two VCRs

•This remote can control two VCRs independently as long as each VCR operates on a different remote transmitting code.

•Some newer VCR's are capable of working on either of two remote codes. These VCRs

have either a switch labeled VCR1/VCR2 or an on-screen display titled REMOTE VCR1/VCR2. You can then set your new

JVCR to respond to the remote's VCR2

J

!button and your older VCR to respond to the VCR1 button.

•Some older VCRs have a NORM/UNIFIED

switch that can also respond to either the VCR1 or VCR2 button on the remote. Place

this switch in the UNIFIED position for the VCR to respond to the VCR1 button or in the NORM position for the VCR2 button. In the NORM position, you must program the VCR2 button to respond to code number 05.

•If neither of your VCR's have switchable

code capabilities, you still may be able to use the VCR1/VCR2 feature to control two

VCRs of the same brand since many older VCRs use remote codes that are different

than newer VCR's. You may want to experiment to see what works with your particular VCRs.

lo Refer to the chart below to find the code number that corresponds to the

brand name of your VCR. Keep this number in mind. If more than

one number is listed, you may need to try each one separately until you find the one that works.

1 Press VCR1 or VCR2 button on remote (depending on which button you want to program for that VCR).

You can program each button to control a different VCR.

ePress ID button on remote.

4.Press two number buttons (first one, then the other) to enter the code number for your brand of VCR. Note: You must press the two number buttons within three seconds of pressing the ID button.

ePoint the remote at the VCR and press the OFF/ON button to test the code number. If nothing happens, try pressing VCR1 or VCR2 (whichever button you are programming).

•If the right number was entered, the VCR should turn on.

•If the VCR does not react to the

remote, repeat steps 1 thru 5 with another code number.

Note: Some older VCRs do not have an OFF/ON switch on their remote controls and cannot be turned on and off remotely. If you have this type of VCR, you can test the code number by pressing the CHANNEL button instead of the OFF/ON button. Make sure the

VCR is already turned on when you test the code number.

Operating Notes:

•After the remote is programmed, it will turn 6n the VCR whenever you press VCR1 (or VCR2) and then ON/OFF. Some VCR's turn on automatically when you press VCR1 or VCR2.

•You'll be able to control the VCR whenever the remote is in the "VCR mode". To put the remote in the "VCR mode", press the VCR1 or VCR2 button (depending on which button you programmed). The other VCR buttons (such as PLAY, PAUSE, STOP

REWIND, FF, and RECORD) will control the VCR when the remote is in the "VCR mode".

•To turn off the VCR, press VCRI (or VCR2), then ON/OFF.

•To change channels on the VCR, press

VCR1 (or VCR2), then CHANNEL up or down.

•You may need to reprogram the remote when you change the batteries. Try not

to press any buttons when changing batteries.

AIWA	.................................................	15
Akai		03,22,23
Audio	Dynamics	14,16
Brooksonic		10
Canon	.................................................	08
Capehart		01
Citizen	................................................	09
Craig		12
Curtis	Mathes	00,08,15
dbx		14,16
Dimensia		00
Emerson		10,20,34
Fisher		12,18,19
Funai		15
GE		00,07,08,32
Goldstar		09
Hitachi	......................................	05,35,36
Instant	Replay	08
JCPenney		02,05,08,14,16,30
JVC		02,14,16,30

Kenwood	02,14,16,30	Samsung		07,32
Magnavox	08,29	Sanyo	.............................................	02,12
Marantz	02,14,16,29,30	Scott		04,13
Marta	09	Sears		02,05,18,19
Memorex	08,12	Sharp	.............................................	06,24
MGA	04,27	Shintom		31
Minolta	05	Sony		17,26,38
Mitsubishi	04,27	Sylvania		08,15,29
Montgomery Ward	06	Symphonic		15
Multitech	07,15,32	Tashiko		09
NEC	02,14,16,30	Tatung	................................................	30
Panasonic	08	Teac		15,30
Pentax	05	Tecnics		08
Philco	08,29	Teknika		21
Philips	08,29	Toshiba		05,13
Pioneer	05	Vector	Research	14,16
ProScan	00	Video	Concepts	14,16
Quasar	08	Wards	............................................	06,25
RCA	00,05,07,28,35,37	Yamaha		02,14,16,30
Realistic	02,06,08,12,15	Zenith	............................................	11,17

...........................................

Note: Refer to the information sheet packed with your remote control for the latest list of brand names and code numbers. Because this list is constantly growing, the information sheet packed with your remote control may be a later version of this list and contain additional brands and/or code numbers.

4O