RCA NCJ11 Channelnumberisdisplayed, Labeling Channels with remote only, Erasing, Steps

Thelabelingfeatureletsyouprogram names(orlabels)for thechannel numbersThenameyouprogram.

will thenappearonthescreenbelow thechannelnumberwheneverthe

channelnumberisdisplayed.

Eachnamecancontainupto four characters,andyou'llbeableto assignupto 64namesAfter. 64

Labeling Channels (with remote only)

1.Repeatedly press MENU to select SETUP MENU, and then press + or - to display setup functions. Repeatedly

press MENU to select CHAN LABEL function.

5.Then press + to move to the next letter frame. Pressing - moves you back to the previous letter frame.

names or labels have been entered, the TV will display this message to let you know no more channels can be labeled: CHAN LABEL: FULL.

Listed below are the letters and characters from which you'll be able

to choose when programming the channel labels:

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

(blank space) ! • # $ % &' ( )

.5+,-./0123456789:; < =>?.@

oPress + to enter the CHAN LABEL function. Four blank letter frames will appear under the channel number.

oRepeat steps 4 and 5 until the name is complete. You can now label another channel, if desired, by selecting the channel number and repeating steps 4 and 5.

oWhen finished, the display will automatically disappear from the screen in a few seconds. Your labels will remain in memory until you erase them. They are not affected by power failures.

You must use your remote control to create or erase labels.

o

.

Select the channel number you want to label by pressing the CHANNEL up or down button (or by pressing two number buttons).

Press and hold the VOLUME up or down button until the letter or

character you want appears on the screen. Pressing VOLUME up sequences through the characters in alphabetical order. Pressing

VOLUME down sequences the letters in reverse order.

Erasing	Labels	,
To erase	a channel	label, first follow
steps 1,	2, and 3 above,		and then press
CLEAR	on the remote		control.

Note: Autoprogramming new channels into the channel memory does not effect the channel labels that are already entered.

22