RCA NCJ11 Special Recording Onto, VHSSuper VHS VCR, Input 1 or 2 jacks, Because, Input 2 jacks

Special

Recording

onto

VCR

(This connection only allows you to record on the VCR whatever is currently being displayed

on the TV

screen.)

This

is not a common application

for recording

Back of VCR

Back of TV

with

your

VCR, but you may find

it useful

in

I

,

HI-FI OUT SELECT OUT

certain situations. This connection will let you

record onto the VCR whatever is being displayed

on the TV screen such as a TV program. You'll

also be able to record signals from another VCR

(or similar device) that is connected to the TV's

INPUT 1 or 2 jacks.

@

The TV must remain turned on during recording.

If you

change channels

on the TV, the channel

AudioNideo

Cables*

INPUT

2-_

ANTB

change

will be recorded

on the VCR tape unless

@

(such as RCA

#AH069G)

VIDEO

you pause the VCR during recording.

@

Because

your TV is cable-compatible,

this

_o_o_

CONVERTER

application may be used to record cable-TV

m

programs from the TV onto a VCR that is not cable-

compatible.

Just remember that you'll be able to record whatever is being

You may also want to use this connection

to dub or edit VCR

displayed

on the TV screen.

To see the signal

from

a device

tapes

with

two or three

VCR's.

By connecting

one VCR (or

connected

to the INPUT 1 jacks,

select

channel

91.

Select

camcorder)

to the INPUT

1 jacks

and another

VCR (or

channel

92 to see the signal

from

a device connected

to the

camcorder)

to the INPUT

2 jacks,

you'll be able to selectively

INPUT 2 jacks.

edit and record whatever is playing on the TV screen on to a

Notes:

Signals from the S-VIDEOconnector do not come

thru the

third VCR (or camcorder) connected as shown here to the

SELECT OUT jacks. To record from an S-VHS component, remember

SELECT

OUT jacks.

to also connect the regular video cable to the VIDEO INPUT 1 jack

If you

connect a surveillance system

to your monitor, you'll

be

and then

tune to channel 91.

able to record what the camera is displaying on the TV screen

Menus, status displays, and special effects like picture-in-picture and

by connecting a VCR (or damcorder) to the SELECT OUT jacks

channel guide will not appear in the recording.

as shown

here.

S-VHS(Super VHS) VCR

(This connection allows you to record TV programs and play back tapes.)

Audio/Video Cables*

(such as RCA

#AH069G) _-_-

Incoming

Cable

Back of VCR

S-VHS Cable (such as RCA #VAA020)*

J

/

J

Coaxial Antenna Cable*

(such as RCA #AH037)

/

Shown here is the preferred method of connecting your S-VHS VCR to your TV. If your cable company requires a decoder box for premium channels, refer to page 34.

Connect the S-VIDEO OUT connector on the back of the VCR

to the S-VIDEOconnector on the back of your TV using an S-VHS cable. Remember to connect the audio cables from the

When recording from SELECT OUT jacks, tune the TV to channel 91 to see the signal from the S-VHS VCR. When displaying picture-in- picture, the TV automatically minimizes any annoying differences in tint between the small and large picture by electronically coupling the S-VIDEOinput to the VIDEO 1 input.

Operation:

VCR to the INPUT 1 LEFT and R/MONO jacks on the back of the TV. The S-VHS cable carries only video.

Note: Remember to also connect the video cable for picture-in-picture viewing or if you plan to use the SELECT OUT jacks for recording.

*Optional accessories are available from most RCA dealers and electronics supply stores.

•If the S-VHS VCR is connected as shown above, tune the TV to channel 90 to view whatever the VCR is playing. The word S-VIDEOwill appear on the TV when you select Channel 90.

•You can program your TV to automatically select channel 90 when you press the VCR1 or VCR2 button. Details are on page 26.

38