RCA VCR VR708HF manual Satellite Receiver Codes, SAT Setup

Using On-Screen Menus

SAT SETUP

On what channel does the VCR receive signals from the SAT receiver?

--

Enter 01-13 or INPUT Press MENU to cancel

SAT SETUP

Enter the code for your SAT receiver from the list in your User's Manual.

--

Press MENU to cancel

4.Enter the output channel of your satellite receiver, usually 03, 04, or video line input and press MENU. The VCR confirms that it receives all DBS signals on the specified channel.

5.Press MENU and enter the code for your digital satellite receiver from the Satellite Receiver Codes list (shown below).

Note: RCA and Proscan satellite receivers operate with either 3-digit or

4-digit channel numbers depending on the model. Please note how many numbers are entered on your RCA or Proscan satellite receiver before entering a code number into the VCR’s SAT Setup menu.

Please turn on your SAT Receiver and tune it to channel 100.

Press MENU to continue

6.Turn on your satellite receiver and tune it to channel 100 and then press the MENU button. Follow the on-screen directions.

Once you have completed the setup, the VCR confirms the satellite receiver setup is completed.

Satellite Receiver Codes

Dishnet (Echo)	07
GE	00, 01
Hughes Network	06
Panasonic	02
Philips	08
Primestar	05
ProScan (using 3-digit channels)	00, 01
ProScan (using 4-digit channels)	10, 11
RCA (using 3-digit channels)	00, 01
RCA (using 4-digit channels)	10, 11
Sony	04
Toshiba	03

Note: This VCR may not control all models of the brands shown.

Chapter 2 17