Using the Remote Control
VCR1 | ON • OFF | TV |
DVD | VCR2 AUX | SAT • CABLE |
MUTE |
| SEARCH |
| CH + |
|
L |
| V |
O |
| O |
V |
| L |
|
| |
| CH - |
|
SPEED |
| GO BACK |
GUIDE |
| INFO |
| OK |
|
MENUCLEAR
1
2 
3
4
5 
6
7
8 
9 
INPUT |
| ANTENNA |
0 |
|
|
REVERSE | PLAY | FORWARD |
RECORD | STOP | PAUSE |
- TRACKING + EDIT FR.ADV
Remote Control Buttons
Your backlit remote control has a light button (
) that glows in the dark. Press this button to light up several key buttons. These buttons remain lit when pressed within a few seconds of each other, or will go dark if no buttons are pressed within seven seconds in order to conserve battery power.
The VCR’s remote control is capable of controlling more than just your VCR. If you have a compatible RCA, GE, or Proscan component, you may be able to operate it without programming the remote control.
You can also operate manjy brands of remotew controllable devices such as other VCRs, TVs, Satellite or Cable Boxes, etc. Just follow the directions for programming the remote control starting on page 30.
Component Buttons
Note: Component buttons determine which device the remote control is set to operate. If the VCR1 button was the last component button pressed, then the remote control will operate the VCR. You will press the TV button to control TV functions, the DVD button to control a DVD player, etc.
AUX Turns on a compatible RCA, GE, or Proscan amplifier/receiver or audio/video receiver. This button can be programmed to control an RCA, GE, or Proscan auxiliary component.
DVD Controls a compatible RCA, GE, or Proscan DVD player. Use the arrow and OK buttons to move around and select items in the DVD player’s menu system.
ON•OFF Turns the VCR on or off when the remote control is set to operate the VCR. Also turns other compatible components on or off.
SAT•CABLE Turns on a compatible RCA, GE, or Proscan satellite receiver and can be programmed to operate different brands of receivers.
TV Turns on a compatible RCA, GE, or Proscan TV and puts the remote control in
VCR1 Turns on a compatible RCA, GE, or Proscan VCR and sets the remote control the
VCR2 Turns on a compatible RCA, GE, or Proscan VCR and sets the remote control to secondary
28 | Chapter 3 |