Using On-Screen Menus
VCR Channels List
Your VCR may come with a list of channels preset at the factory. Even though it may come with such a list, you might want to add or delete certain channels.
Note: If you use a cable box to view all channels, this step is not necessary.
Auto Channel Searching
Notes: Use Auto Channel Search to place all available channels in memory.
If you ever change cable or antenna signals, you may need to run the Auto Channel Search feature again.
AUTO CHANNEL SEARCH
What type of signal are you using?
1 Cable TV
2Antenna
3Detect Automatically
0 Cancel
1.Press the MENU button to display the VCR MAIN MENU.
2.Press 4 to select CHANNELS.
3.Press 1 to select AUTO CHANNEL SEARCH.
4.Select one of the three options: Cable TV searches for cable stations. Antenna searches for local broadcast stations.
Detect Automatically decides which input to use for you.
Note: With Detect Automatically, a strong cable or antenna signal in your area may cause channels to be detected inaccurately. If this should happen, manually select the input signal for the system you have.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
6 SAT Setup
0 Exit
The VCR begins scanning for channels available in the area (taking about
Changing the Signal Type
This feature is useful if your cable signal goes out; it allows you to switch to a regular antenna for alternate television reception.
1.Press the MENU button to display the VCR MAIN MENU.
2.Press the 4 button to choose CHANNELS.
3.Press 3 to choose between Signal Type: Cable and Antenna. When finished, press 0 to exit back to the Main Menu and 0 again to return to normal viewing.
20 | Chapter 2 |