VCR Features
Mapping VCR Plus+ System Channels Manually
Using the VCR Plus+ GOLD programming system can make setting up timer recordings for cable or standard TV easier. If your VCR Plus+ GOLD system setup failed during the interactive Setup, then you will see a prompt on the screen.
VCR PLUS+ SETUP
Last automatic setup was unsuccessful. Would you like to:
1 Try again
2 Finish setup manually
3 Cancel the auto setup
VCR PLUS+ SETUP
1 Set channel lists
2 Auto VCR Plus+: ON
VCR Plus+ data was not found.
0 Exit
VCR+ Channel My Channel
5
4
3
2 | |
1 |
Use CH+/- to select Press
VCR+ Channel My Channel
5 46
4
3
2 | |
1 |
Use CH+/- to select Press
(Screen shown is only an example.)
If the automatic download continuously fails, you will need to map the channels for your local service manually. A worksheet and abbreviated codes for typical cable services in the U.S. and Canada are provided on the following pages.
To Manually Map VCR Plus+ System Channels:
1.Press the MENU button to display the VCR MAIN MENU.
2.Press the 4 button to choose CHANNELS.
3.Press the 4 button to choose VCR Plus+ Setup.
4.Press 1 to display the Set channel lists menu.
5.Enter the data following the
Chapter 4 | 37 |