Pioneer DVR-220 operating instructions Repeat play, Program play

05Playback

1During playback, select ‘A-B Repeat’ from the Play Mode menu.

2With ‘A (Loop Start)’ highlighted, press ENTER at the point you want the loop to start.

After setting the loop start point, the highlight will automatically move down to B(Loop End).

3With ‘B (Loop End)’ highlighted, press ENTER at the point you want the loop to end.

Playback immediately jumps back to the start point and plays the loop round and round.

•When playing a DVD-Video/Video mode DVD, the start and end points of the loop must be in the same title.

4To resume normal playback, select ‘Off’ from the A-B Repeat menu.

•You can also press CLEAR to cancel A-B Repeat play if no menu OSD (such as the Disc Navigator) is displayed.

Note

•If you switch camera angles while using A-B Repeat with a DVD-Video disc, A-B repeat is canceled.

Repeat play

ALL

There are various repeat play options, depending on the kind of disc loaded. It’s also possible to use repeat play together with program play to repeat the tracks/chapters in the program list (see Program play below).

1Select ‘Repeat’ from the Play Mode menu.

2Select a repeat play mode.

38

VR mode

•For VR mode DVD discs, select Repeat Disc, Repeat Title or Repeat Chapter (or Repeat Off).

DVD-Video Video mode

•For DVD-Video and Video mode DVD discs, select Repeat Title or Repeat Chapter (or Repeat Off).

•For CDs and Video CDs, select Repeat Disc or Repeat Track (or Repeat Off).

WMA/MP3

•For WMA/MP3 discs, select Repeat Disc, Repeat Folder or Repeat Track (or Repeat Off).

3To resume normal playback, select ‘Repeat Off’ from the Repeat Play menu.

•You can also press CLEAR to cancel repeat play if no menu OSD (such as the Disc Navigator) is displayed.

Note

•If you switch the camera angle during repeat play of a DVD-Video disc, repeat play is canceled.

•If there is a program list, you can also select Repeat Program to repeat the program list.

Program play

This feature lets you program the play order of titles/ chapters/folders/tracks on a disc.

1Select ‘Program’ from the Play Mode menu.

2Select ‘Input/Edit Program’ from the list of program options.

The Program edit screen that appears depends on the kind of disc loaded.

On the left side is the program list, then to the right is a list of titles (DVD), folders (WMA/MP3), or tracks (CD, Video CDs). On the far right is a list of chapters (DVD) or tracks (WMA/MP3).