Pioneer DVR-220 Video Out settings, Manual CH Setting, VCR Plus+ CH Setting, Component Video Out

The Initial Setup menu 12

After automatic tuning, a summary channel mapping screen is displayed.

	Initial Setup
Channel Mapping Antenna							1/3
CH	Skip	CH	Skip	CH	Skip	CH	Skip
		9	Off	17	Off	25	Off
2	Off	10	Off	18	Off	26	Off
3	Off	11	Off	19	Off	27	Off
4	Off	12	Off	20	Off	28	Off
5	Off	13	Off	21	Off	29	Off
6	Off	14	Off	22	Off	30	Off
7	Off	15	Off	23	Off	31	Off
8	Off	16	Off	24	Off	32	Off

Press ENTER to return to the main menu screen.

Note

•If you want to cancel before tuning has finished, press ENTER.

•You can manually tune and skip blank channels using the Manual CH Setting, below.

Manual CH Setting

• Default setting: n/a

The channel skip function lets you skip channels where there is no station so that as you change channels using the CHANNEL +/– buttons or the number buttons, you only change to channels that have a station.

The manual tuning function allows you to manually tune to stations, should you need to.

Initial Setup
Basic	Auto Channel Setting	Next Screen
Tuner	Manual CH Setting
Video Out	VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback

1From the manual channel setting screen:

•Use the CHANNEL +/– button to change channels.

•If you want to skip the displayed channel (because there is no station assigned to that channel), change the Skip setting to On.

•If you want to manually tune the displayed channel, change the AFT (Auto Fine Tuning) setting to Off, then move down to Level to manually tune to a station.

2ch

SkipOff

AFTOff

Level0

• To return to the Initial Setup menu, press ENTER.

VCR Plus+ CH Setting

• Default setting: n/a

Guide channels are used by the VCR Plus+ system so that the channel number specified in the VCR Plus+ programming numbers can be guaranteed to correspond to the correct station.

1 Select ‘VCR Plus+ CH Setting’, then ‘Next Screen’.

Initial Setup
Basic	Auto Channel Setting	Next Screen
Tuner	Manual CH Setting
Video Out	VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback

2Assign channel numbers to the guide channels as necessary.

Look in your TV guide to see which channel numbers should be assigned to which guide channels.

Initial Setup
Basic	VCR Plus+ CH Setting				1/20
	Auto Channel Setting
Tuner	Manual CHGuideSetting	CH		Guide	CH
Video Out	VCR Plus+ CH Setting		6	6
Audio In	1
	2			7
Audio Out
	3			8
Language
	4			9
Recording
	5			10
Playback

• Use the	(cursor up/down) buttons to change
the guide channel for setting.
• Use the	(cursor left/right) buttons to change

the channel number.

•Use the PREV / NEXT button to display the previous/ next 10 guide channels.

3 To return to the Initial Setup menu, press ENTER.

Video Out settings

Component Video Out

• Default setting: Interlace

You only need to make this setting if you connected this recorder to your TV using the component video jacks.

Initial Setup
Basic	Component Video Out	Interlace
Tuner		Progressive
Video Out
Audio In
Audio Out
Language
Recording
Playback

77

En