Pioneer DVR-220 Erase Section Erase Sec, Inserting chapter markers into a title, Title

07Editing

•Preview – Preview chapters: Select the chapter you want to play; press STOP to return to the chapter edit screen.

•Undo – Undo the last command (only works with VR mode disc edits).

3Press RETURN to get back to the menu options on the left side of the screen.

4To return to the Disc Navigator screen, press RETURN again, or select ‘Back’ from the menu options on the left.

Note

•It may not be possible to erase chapters less than 5 seconds long.

•It may not always be possible to combine two chapters, even though they are adjacent. If a chapter has been divided into three, then the middle chapter erased, it is not possible to combine the two remaining chapters into one.

Erase Section (Erase Sec)

VR mode

Using this command you can delete a part of an Original title, ideal for cutting out the commercial breaks in a recording made from the TV.

1Select ‘Erase Sec’ from the Disc Navigator menu options.

2 Use the	(cursor buttons) to select a
title.

After selecting a title, the Erase Sec screen appears fro which you can mark the start and end points of the section to erase.

3 Use the playback controls ( , , , , etc) to find the start of the section to erase, then (with ‘From’ highlighted) press ENTER.

The bar at the bottom of the screen shows the current play position in the title. After pressing ENTER, a marker appears under the bar to show the start of the section.

Play Pause

AB

From T 0.02.09.17

A

4In the same way, find the end of the section to erase, then (with ‘To’ highlighted) press ENTER. After pressing ENTER, another marker appears under the bar to show the end of the section, with the section itself marked in red.

5Select ‘Yes’ to confirm, or ‘No’ to cancel, then press ENTER.

•You may not be able to erase very short sections (less than five seconds).

6Erase another section from the same title, or

press RETURN to get back to the main Disc Navigator screen.

Inserting chapter markers into a title

VR mode

You can create new chapters within a title using the CHP MARK button while playing the title or during recording. This is useful not just for navigation of the disc content but also for editing purposes.

Erase Sec

Original

DVD

Title 2

Erase Sec

Back

12/01Wed 12:18AM	SP
Recording Time	0h01m24s
1-3	0.00.52.17
Play Pause
A	B
From	To

PAUSE

CHP

MARK

1Start playback of the title you want to create new chapter markers in.

You can use the Play command from the Disc Navigator menu to do this.

60

En