CQ-C8803U
Specifications
41

Notes on discs, Maintenance, Specifications

Notes:

¡Specifications and design are subject to modification

without notice due to improvements.

¡Some figures and illustrations in this manual may be

different from your product.

General

Sampling Frequency 8 times oversampling
Pick-Up Type Astigma 3-beam
Light Source Semiconductor laser
Wavelength 790 nm
Frequency Response 20 Hz – 20 kHz (±1 dB)
Signal to Noise Ratio 96 dB (2 V), 106 dB (5 V)
Total Harmonic Distortion
0.01 % (1 kHz)
Wow and Flutter Below measurable limits
Channel Separation 86 dB (5 V)
FM
Frequency Range 87.9 MHz – 107.9 MHz
Usable Sensitivity 12.2 dBf (1.12 µV, 75 Ω)
50 dB quieting Sensitivity
15.2 dBf (1.59 µV, 75 Ω)
Frequency Response 30 Hz – 15 kHz (±3 dB)
Alternate channel selectivity
75 dB (MID)
Stereo Separation 45 dB (at 1 kHz)
Image response ratio 75 dB (MID)
IF response ratio 100 dB (MID)
Signal to noise ratio 62 dB
AM
Frequency Range 530 kHz – 1 710 kHz
Usable Sensitivity 25 dB/µV (11 V, S/N 20 dB)
English
Power Supply DC 12 V (11 V – 16 V), Test Voltage 14.4 V, Negative Ground
Tone Controls (Bass/Treble)
Bass; ±12 dB at 80 Hz, Treble; ±12 dB at 6 kHz
Equalizer Center Frequency
62.5, 125, 250, 500, 1 k, 2 k, 4 k, 8 k, 16 k (Hz, default)
Variable Range of Equalizer
-
12 dB to 12 dB (2 dB step)
Current Consumption Less than 2.5 A (CD mode, 0.5 W 4-Speaker)
Maximum Power Output
70 W x 4 (at 1 kHz)
Speaker Impedance 4 – 8 Ω
Pre-amp output voltage
5 V (CD mode, 1 kHz, 0 dB)
Subwoofer-output voltage
5 V (CD mode, 1 kHz, 0 dB)
Pre-amp output impedance
60 Ω
Subwoofer-output impedance
60 Ω
Dimensions (Main Unit)
178(W) x 50(H) x 155(D) mm {7”x 1 15/16
”x 6 1/8
”}
Weight (Main Unit) 1.7 kg {3 lbs. 12 oz}

Above Specifications comply with EIA standards.

Power Output:
31 W RMS x 4 Channels at 4 Ωand ≤1%
THD+N
Signal to Noise Ratio:
80 dBA (reference: 1 W into 4 Ω)

Radio CD Player