Remote control unit
Problem
No response to pressing buttons
Possible cause a Possible solution
The battery is inserted in the wrong direction. A wrong battery is inserted.
aInsert a correct battery in the correct direction.
The battery is weak.
aReplace the battery with new one.
The aiming direction of the remote control unit is wrong.
aAim the remote control unit at the sensor of the unit and press buttons.
The sensor is exposed to direct sunlight. (The remote control unit may not be opera- ble when the sensor is exposed to direct sunlight. In such a case, the system is not faulty.)
aBlock off sunlight to the sensor.
English
Messages
Error Display Messages
Display
Display
CD/MP3/WMA
(After 5 seconds)
To next file automatically
Possible cause a Possible solution
The disc is dirty, or is upside down.
aCheck the disc.
The disc has scratches.
aCheck the disc.
No operation by some cause.
aUnplug the power cord and plug it again. In case the unit is still out of order, consult your dealer. (a Installation Instructions)
The player for some reason cannot read the file you are trying to play. (File recorded in an unsupported file system, compression scheme, data format, file name exten- sion, damaged data, etc.)
aSelect a file that the player can read. Check the type of data recorded on the disc. Create a new disc if necessary.
A WMA file can be copyrighted.
aThe file protected by copyright is not playable.
Troubleshooting, Error
No disc.
Note: Refer to the System Upgrade Guidebook for error messages regarding optional products.
