Pioneer DVR-510H manual Playing CDs and WMA/MP3 discs, Playing Video CDs

Getting started 04

Playing CDs and WMA/MP3 discs

The table below shows the basic playback controls for audio CDs, and WMA/MP3 files.

PLAY Press to start playback.

STOP Press to stop playback.

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN CD and MP3 only: Press to start scanning. Press again to increase the scanning speed. (There are two scan speeds; the current scan speed is shown on-screen.)

PREV NEXT Press to skip to previous/next track (or folder for WMA/MP3 disc).

During playback, enter a track number then press ENTER to skip directly to that track.

CLEAR

Note

•If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amplifier with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO button (see Changing audio channels on page 27).

•Scanning doesn’t work with WMA tracks.

Playing Video CDs

The table below shows the basic playback controls for Video CDs.

Some discs feature Playback Control (PBC for short) menus. These discs show PBC in the display when you load them and display a menu on-screen from where you can select what to watch.

PLAY Press to start playback.

If RESUME is displayed on-screen, play- back starts from the place last stopped.

				Press to stop playback.
		STOP
				You can resume playback from the same
				point by pressing PLAY. (Press STOP
				again to cancel the resume function.)
				Pauses playback, or restarts playback
			PAUSE
				when paused.
				Press to start scanning. Press repeatedly
REV SCAN		FWD SCAN
				to increase the scanning speed. (There are
				two scan speeds; the current scan speed
				is shown on-screen.)
				Press to skip to previous/next track. (When
	PREV		NEXT
				a PBC menu is displayed, press to display
				the previous/next page.)
				During playback, enter a track number
				then press ENTER to skip directly to that
				track.
				While a PBC menu screen is displayed,
			CLEAR	use to select numbered menu items.

CM SKIP Each press skips forward 30 seconds. Use to a maximum of 4 mins. Note that this

function doesn’t work when playing in PBC mode.

STEP/SLOW During playback, press to start slow- motion playback. Press repeatedly to change the playback speed.

While paused, press to advance a single frame (forward direction only).

RETURN Press to display the disc menu of a Video CD playing in PBC mode.

Note

•When playing in PBC mode, some playback features, such as search, repeat and program play are not available. You can play a PBC Video CD in non-PBC

mode by pressing	to start playback instead of
PLAY.

29

En