Pioneer DVR-510H manual Initial Setup menu, Tuner settings

13The Initial Setup menu

On Screen Display

• Default setting: On

Initial Setup
Basic	Clock Setting	On
Tuner	On Screen Display	Off
Video Out	Front Panel Display
Audio In	Remote Control Set
Audio Out	Setup Navigator
Language
Recording
Playback

On the default setting, the recorder shows on-screen operation displays (Play, Stop and so on). Change to Off to hide these displays.

Front Panel Display

• Default setting: On

Initial Setup
Basic	Clock Setting	On
Tuner	On Screen Display	Off
Video Out	Front Panel Display
Audio In	Remote Control Set
Audio Out	Setup Navigator
Language
Recording
Playback

Note that as soon as you change the recorder ID, the remote becomes inoperative until you change the remote to the same ID.

To set the remote, press and hold RETURN and a number button (1, 2 or 3) until the indicator on the remote lights.

Setup Navigator

• Default setting: n/a

Initial Setup
Basic	Clock Setting	Start
Tuner	On Screen Display
Video Out	Front Panel Display
Audio In	Remote Control Set
Audio Out	Setup Navigator
Language
Recording
Playback

The Setup Navigator appears automatically when you switch on the recorder for the first time (or after resetting the recorder). It is also available from the Initial Settings menu should you need it at any other time.

See also Switching on and setting up on page 23.

On the default setting, the time is shown in the front panel display when the recorder is in standby. Switch to Off to have the front panel display switch off completely when in standby.

Note

•When set to Off, the display still lights dimly in standby when setting a timer recording, or during Auto Start Recording.

Remote Control Set

• Default setting: Recorder1

You only need to set this if you are using more than one Pioneer DVD recorder in the same room.

Initial Setup
Basic	Clock Setting	Recorder1
Tuner	On Screen Display	Recorder2
Video Out	Front Panel Display	Recorder3
Audio In	Remote Control Set
Audio Out	Setup Navigator
Language
Recording
Playback

So that each remote control operates only its own recorder, make this setting different for each recorder and remote in the room.

There are three different recorder IDs. When set to Recorder2 or Recorder3, the remote control mode is shown in the front panel display.

90

Tuner settings

Auto Channel Setting

• Default setting: Antenna

Initial Setup
Basic	Auto Channel Setting	Antenna
Tuner	Manual CH Setting	Cable
Video Out	VCR Plus+ CH Setting
Audio In
Audio Out
Language
Recording
Playback

Auto Channel Setting automatically tunes the built-in TV tuner to terrestrial broadcast TV channels or cable channels. Select Antenna or Cable, depending on how you receive your TV channels, then wait for the automatic tuning to finish.

Tuning

7/68

Cancel

En