Pioneer PDP-425CMX manual INTEGRATOR-OPTION related commands

RS-232C Adjustment

7“INTEGRATOR”–“OPTION” related commands

Command	Function	Number direct				Last
		Effective	Minimum	Maximum		memory
SCREEN MASK
FMKS00	Sets SCREEN MASK to OFF.					￿
FMKS02	Sets SCREEN MASK to inverse (negative – positive reversed).					￿
FMKS03	Sets SCREEN MASK to white mask.					￿
FMKS04	Sets SCREEN MASK to red mask.					￿
FMKS05	Sets SCREEN MASK to green mask.					￿
FMKS06	Sets SCREEN MASK to blue mask.					￿
FMKS07	Sets SCREEN MASK to yellow mask.					￿
SIDE MASK
RSL	Adjusts side mask RED.	￿	000		255	￿
GSL	Adjusts side mask GREEN.	￿	000		255	￿
BSL	Adjusts side mask BLUE.	￿	000		255	￿
VIDEO WALL
MGFS00	Sets VIDEO WALL to OFF.					￿
MGFS11	Sets VIDEO WALL to DIVIDER:1.					￿
MGFS12	Sets VIDEO WALL to DIVIDER:4.					￿
MGFS13	Sets VIDEO WALL to DIVIDER:9.					￿
MGFS14	Sets VIDEO WALL to DIVIDER:16.					￿
MGFS15	Sets VIDEO WALL to DIVIDER:25.					￿
MGPSnn	nn=01 to 04: Sets display position during DIVIDER=4 (not accounting for joints).					￿
	nn=05 to 08: Sets display position during DIVIDER=4 (accounting for joints).					￿
	nn=10 to 18: Sets display position during DIVIDER=9 (not accounting for joints).					￿
	nn=20 to 28: Sets display position during DIVIDER=9 (accounting for joints).					￿
	nn=30 to 3F: Sets display position during DIVIDER=16 (not accounting for joints).					￿
	nn=40 to 4F: Sets display position during DIVIDER=16 (accounting for joints).					￿
	nn=50 to 68: Sets display position during DIVIDER=25 (not accounting for joints).					￿
	nn=70 to 88: Sets display position during DIVIDER=25 (accounting for joints).					￿
IDA	Executes AUTO ID setting.					￿
PDES00	Sets POWER ON DELAY mode to OFF.					￿
PDES01	Sets POWER ON DELAY mode to ON (other than cases used for a higher than					￿
	16 screen system) or mode 1(used for a higher than 16 screen system).
PDES02	Sets POWER ON DELAY mode 2 (used for a higher than 16 screen system).					￿
LNKS00	Sets ABL link to OFF.					￿
LNKS01	Sets ABL link to ON.					￿
RS-232C
BRAS01	Sets the RS-232C baud rate to 1200 bps.					￿
BRAS02	Sets the RS-232C baud rate to 2400 bps.					￿
BRAS03	Sets the RS-232C baud rate to 4800 bps.					￿
BRAS04	Sets the RS-232C baud rate to 9600 bps.					￿
BRAS05	Sets the RS-232C baud rate to 19200 bps.					￿
BRAS06	Sets the RS-232C baud rate to 38400 bps.					￿
ID NUMBER
IDC	Clears the ID number.					￿
IDS	Sets the ID number.					￿
FAN
FCM	Maximizes fan rotation control.					￿
FCA	Automates fan rotation control.					￿
OSD
OSDS00	Sets OSD display to OFF.					￿
OSDS01	Sets OSD display to ON.					￿
OSSS01	Displays expanded OSD.					￿
OSSS02	Displays contracted OSD.					￿
OSAS01	Sets the OSD display angle to horizontal.					￿
OSAS02	Sets the OSD display angle to vertical.					￿

11