Pioneer PDP-425CMX manual QSS Obtaining Setup information

RS-232C Adjustment

5) <QSS> Obtaining SETUP information

Sequence	Data Content	Size				Remarks
1	STX	1 Byte	02hex
2	Command echo-back	3 Byte	QSS (fixed)
3	COLOR TEMP.	1 Byte	1: LOW	2: MID LOW 3: MIDDLE			4: MID HIGH
			5: HIGH	Note 1)
4	POWER MGT.	1 Byte	0: OFF	1: ON
5	AUTO POWER OFF	1 Byte	0: DISABLE 1: ENABLE
6	DNR	1 Byte	0: OFF	1: LOW		2: MIDDLE	3: HIGH	Note 1)
7	MPEG NR	1 Byte	0: OFF	1: LOW		2: MIDDLE	3: HIGH	Note 1)
8	CTI	1 Byte	0: OFF	1: ON	Note 1)
9	PURECINEMA	1 Byte	0: OFF	1: ON	Note 1)
10	COLOR DECODING	1 Byte	1: RGB	2: COMP1		3: COMP2 Note 1)
11	COLOR SYSTEM	1 Byte	1: AUTO	2: NTSC		3: PAL 4: SECAM		5: 4.43NTSC
			6: PAL M	7: PAL N		Note 1)
12	DVI SET UP (PLUG/PLAY)	1 Byte	1: PC	2: VIDEO		Note 1)
13	DVI SET UP (BLACK LEVEL)	1 Byte	1: LOW	2: HIGH	Note 1)
14	BRT.ENHANCE	1 Byte	0: OFF	1: ON	Note 1)
15	SUB VOLUME	2 Byte	00 to 20
16	Main input function	3 Byte	Same as item 9 of QST commands
17	Main screen size information	1 Byte	Same as item 11 of QST commands
18	Check sum	2 Byte
19	ETX	1 Byte	03hex

Note 1) In the case of set data that cannot be output because of the type of input signal, dummy data is output.

6)<QSO> Obtaining menu integrator/OPTION information

Sequence	Data Content	Size				Remarks
1	STX	1 Byte	02hex
2	Command echo-back	3 Byte	QSO (fixed)
3	ENERGY SAVE	1 Byte	1: STANDARD 2: MODE1				3: MODE2		4: MODE3
			5: AUTO
4	Program timer	1 Byte	0: OFF	1: ON
5	SCREEN MANAGEMENT (ORBITER)	1Byte	0: OFF	1: MODE1		2: MODE2		3: MODE3
6	SCREEN MANAGEMENT (SOFT FOCUS)	1 Byte	0: OFF	1: 1	2: 2	3: 3	4: 4
7	AUTO SETUP MODE	1 Byte	0: INACTIVE		1: ACTIVE
8	AUTO FUNCTION	1 Byte	0: OFF	1: INPUT1		2: INPUT4
9	PIP DETECT	1 Byte	0: INACTIVE		1: ACTIVE
10	SPLIT FREEZE	1 Byte	0: OFF	1: SIDE BY SIDE 2: PIP
11	SCREEN MASK	1 Byte	0: OFF	2: INVERSE		3: WHITE		4: RED	5: GREEN 6: BLUE
			7: YELLOW
12	SIDE MASK R-LEVEL	3 Byte	000 to 255
13	SIDE MASK G-LEVEL	3 Byte	000 to 255
14	SIDE MASK B-LEVEL	3 Byte	000 to 255
15	VIDEO WALL (MODE)	1 Byte	0: OFF	1: 1 screen		2: 4 screens		3: 9 screens 4: 16 screens
			5: 25 screens
16	VIDEO WALL (POSITION)	2 Byte	01 to 56
17	VIDEO WALL (TYPE)	1 Byte	0: NORMAL		1: ADJUSTED
18	VIDEO WALL (POWER ON DELAY)	1 Byte	0: OFF		1: ON	2: MODE1		3: MODE2
19	VIDEO WALL (PLE LINK)	1 Byte	0: OFF		1: ON
20	VIDEO WALL (REPEAT TIMER)	1 Byte	0: OFF		1: ON
21	FAN CONTROL	1 Byte	1: AUTO		2: MAX
22	OSD	1 Byte	0: OFF		1: ON
23	OSD SIZE	1 Byte	0: LARGE		1: SMALL
24	OSD ANGLE	1 Byte	0: H		1: V
25	FRONT INDICATOR	1 Byte	0: OFF		1: ON
26	COLOR MODE	1 Byte	1: NORMAL		2: STUDIO

16