Pioneer PDP-425CMX manual QSU obtaining the audio status, QCI Obtaining time information

RS-232C Adjustment

Sequence	Data Content	Size					Remarks
27	PRO USE UNDERSCAN	1 Byte	0: OFF		1: ON
28	PRO USE IMAGE PROCESS	1 Byte	1: NORMAL		2: PURE		3: MONOTONE		4: HIGH CONTRAST
29	PRO USE SYGNAL TYPE	1 Byte	1: MOTION		2: STILL		3: NONE STD
30	FRC	1 Byte	0: OFF		1: ON
31	POWER ON MODE INPUT	1 Byte	See the figure below.
32	POWER ON MODE MULTI MODE	1 Byte	See the figure below.
33	POWER ON MODE MULTI INPUT 1	1 Byte	1: INPUT		2: INPUT2		3: INPUT3		4: INPUT4	5: INPUT5
34	POWER ON MODE MULTI INPUT 2	1 Byte	1: INPUT		2: INPUT2		3: INPUT3		4: INPUT4	5: INPUT5
35	POWER ON MODE VOLUME	2 Byte	0 to 42: In the case of lost memory, FF
36	SEAMLESS SW	1 Byte	0: OFF		1: ON
37	SEAMLESS SW SELECT1		1: INPUT		2: INPUT2		3: INPUT3		4: INPUT4	5: INPUT5
38	SEAMLESS SW SELECT2	1 Byte	1: INPUT		2: INPUT2		3: INPUT3		4: INPUT4	5: INPUT5
39	MIRROR MODE	1 Byte	0: OFF	1: X		2: Y	3: XY
40	MULTI SCREEN SET (S BY S SIZE)	1 Byte	1: NORMAL		2: FULL
41	MULTI SCREEN SET (S BY S LAYOUT)	1 Byte	1: MODE1		2: MODE2			3: MODE3
42	MULTI SCREEN SET (PIP SIZE)	1 Byte	1: 1 (SMALL) to 4: 4 (LARGE)
43	MULTI SCREEN SET (TRANSLUCENT)	1 Byte	0: OFF	1: 10 %		2: 20 %		3: 30 %	4: 40 %	5: 50 %
			6: 60 % 7: 70 %			8: 80 %
44	MULTI SCREEN SET (BANNER PIP)	1 Byte	0: OFF	1: TOP		2: MID HIGH 3: MID LOW				4: BOTTOM
45	MULTI SCREEN SET (BANNER INPUT)	1 Byte	1: INPUT1		2: INPUT2
46	Main input function	3 Byte	Same as item 9 of QST commands
47	Main screen size information	1 Byte	Same as item 11 of QST commands
48	Check sum	2 Byte
49	ETX	1 Byte	03hex

7) <QSU> obtaining the audio status

Sequence	Data Content	Size	Remarks
1	STX	1 Byte	02hex
2	Command echo-back	3 Byte	QSU (fixed)
3	Main volume	3 Byte	000 to 042
4	Audio mute status	1 Byte	0: OFF 1: ON
5	INPUT1 sub volume	3 Byte	000 to 020
6	INPUT2 sub volume	3 Byte	000 to 020
7	INPUT3 sub volume	3 Byte	000 to 020
8	INPUT4 sub volume	3 Byte	000 to 020
9	INPUT5 sub volume	3 Byte	000 to 020
10	Check sum	2 Byte
11	ETX	1 Byte	03hex

8) <QCI> Obtaining time information

Sequence	Data Content	Size			Remarks
1	STX	1 Byte	02hex
2	Command echo-back	3 Byte	QCI (fixed)
3	Time information	2 Byte	Hour (24 hour system) 00 to 23 Note 1)
		2 Byte	Minute 00 to 59		Note 1)
		2 Byte	Second 00 to 59		Note 1)
4	Dummy data	8 Byte
5	Day of week	1 Byte	1: Sunday	2: Monday		3: Tuesday	4: Wednesday
			5: Thursday	6: Friday		7: Saturday	Note 1)
6	Check sum	2 Byte
7	ETX	1 Byte	03hex

Note 1) During standby and when this command was initially set, the value at the time that power was finally shut off is transmitted.

17